Project Executioner

[Syclone0565]

Re: Project Executioner

Motor is done and heading to the Dyno tomorrow. I will post up the dyno video of it once I receive it. If all goes as planned I should have the motor by the end of the week and maybe hear the truck come to life next weekend. :tup:

 

[T-Bone]

Re: Project Executioner

Motor is finished up and should be here next week. Its about time!

Good things come to those that wait :tup:

 

[Syclone0565]

Re: Project Executioner

Here is the DYNO video from yesterday. 94* and 70% humidity still made over 1000hp. I will post up the Dyno sheet once I receive it. Should be quite rowdy. :tup:


https://vimeo.com/176748331

 

[T-Bone]

Re: Project Executioner

Lil' confused....I thought Steve Morris was building this engine. I see Borowski on the valve covers. Either way, that motor should get you in the low 12's

 

[Syclone0565]

Re: Project Executioner

Lil' confused....I thought Steve Morris was building this engine. I see Borowski on the valve covers. Either way, that motor should get you in the low 12's

Steve Morris is building my next engine. Borowski Racing built this one. I will be in the 9's easy on street tires, 8's if I put on some ET streets. 1200hp on 91 pump gas and ALKY injection. :tup:

 

[Trizney]

Re: Project Executioner

Here is the DYNO video from yesterday. 94* and 70% humidity still made over 1000hp. I will post up the Dyno sheet once I receive it. Should be quite rowdy. :tup:


https://vimeo.com/176748331

Like music to my ears.

 

[Syclone0565]

Re: Project Executioner

This just arrived today. Its going in Friday morning.

20160810_183048 by Will Robbins, on Flickr

 

[SEL777]

Re: Project Executioner

This just arrived today. Its going in Friday morning.

20160810_183048 by Will Robbins, on Flickr

Damn.

 

[Next Phase]

Re: Project Executioner

Wow! Love the looks of this!

 

[Ty1642]

Re: Project Executioner

Looks like a wild animal in a cage.

 

[SEL777]

Re: Project Executioner

Whats in the big box from RPM in front of the motor?

 

[Syclone0565]

Re: Project Executioner

Whats in the big box from RPM in front of the motor?

I sent them my RPM oil pan to install on the motor to tune the motor in on the Dyno. They used it and it robbed 35hp off the motor over the regular oil pan they use. Don't ask me how. They put the other pan on to see if something else was wrong and the 35hp was there. I am not worried about the 35hp loss with over 1000hp.

 

[Trizney]

Re: Project Executioner

Too much oil sloshing around causing resistance to the crank? That's crazy a pan could rob HP.

 

[Syclone0565]

Re: Project Executioner

Had to get up early (6am) and install the motor. I just couldn't wait any longer. Still have to pull it back out once more to tweek a couple little things but it fit and the hood closes by about 1/2".

20160813_100941 by Will Robbins, on Flickr

20160813_130517 by Will Robbins, on Flickr

 

[T-Bone]

Re: Project Executioner

That engine compartment has just turned into a bank vault.....gorgeous, Will !!!!!

 

[choffert1]

Re: Project Executioner

What engine mounts and headers are you using?

 

[Trizney]

Re: Project Executioner

How's the progress coming along?

Interested in the outcome for the cluster and AC system you're using.

 

[Syclone0565]

Re: Project Executioner

UPDATE: Truck was at LS Fest in Bowling Green this past weekend. Big hit. Its running and driving just buttoning up a few things before going out and making lots and lots of videos. I have the initial start up and first drive up the street video I am uploading now. I will post a link soon. A/C is not installed yet.

 

[Trizney]

Re: Project Executioner

You get everything all buttoned up?

Wondering how the dash cluster and the AC ended up working for you.

 

[Trizney]

Re: Project Executioner

Any new updates?