Search results

hey fellas, Truck is finally all back together and running and I want to start concentrating on getting it tuned properly. Ever since I started modifying the truck it's never idled smooth, cruised well, and judging by the main bearings it wasn't any good under boost either... lol I have...

Ok I've done some research and I'm getting mixed opinions. My engine is all apart (after less than 500 miles) and I wasn't going to replace the rings during reassembly. Looking at the cost of rings I figure I'll just change them. Dropping the block off Saturday for machine work and I'm planning...

Some of you know the predicament I'm in with a cracked cylinder. I'm compiling parts to rebuild and I've heard (from some people) that you can reuse cometic gaskets. We've done it in a pinch with the race engines but what about a street vehicle? Gaskets came off looking perfect. Not trying to be...

Found a cracked cylinder wall in my .030 over motor with a fresh rebuild. Needless to say I'm taking it out and weighing my options. I'm going to price getting it sleeved but I want to keep my options open. I may also have a local stock block as an option so I'm also pricing have a stock block...

Not sure why I'm really asking this as I have my suspicions. I'm getting gas in the oil. The truck sits more than it's driven and pretty much every last part is new. Truck was completely rebuilt from the chassis up. I started noticing smoke at start up (smells like fuel) and I noticed my oil...

Selling these for a friend that doesn't need them. Should be a direct bolt on to a sy/Ty. These are OE wheels not knock-offs. 17x8.5 up front with 245/40zr17 Michelin pilot sports with good tread and 18x9.5 rear with 265/35zr17 Goodyear eagle f1's with about 30% tread left. Tires will more than...

Looking for a good 4" cobra elbow for my turbo intake. I bought a cheap one and it is sucking closed under boost. What are you guys using? Looking for the hard rubber one that won't go soft under heat and close. Thanks in advance!

No longer need it, my new turbo is 4" so I had to swap it out. Had no issues with clearance with with my PTE turbo and RPM trans cooler line kit. This is the one Mike from RPM sells, not one of the cheap flimsy ones that sucks in under boost. $30 shipped, will include the hose clamps to go...

Debating on taking the plunge on a new bigger turbo for my build. Looking at the precision PTE6266, 6265, and 6262. Sticking with precision since it will be a direct bolt in for my current setup My build is 63lb injectors, 3000 stall 9/11, vortec heads, 422 cam, BBK 52mm throttle body, RPM A2A...

Ok so it's time to upgrade my turbo. My build is out performing my current PTE 60-1 turbo and. My currnet turbo needs a rebuild so I figure if I'm taking it off I'd like to upgarde while I'm at it. Looking for a PTE6266 or similar, internal wastegate, PTE exhaust flange etc. Looking for a bolt...

Guys I'm tired of blowing off the dust and tripping over these parts in my shop. All prices do not include shipping and I will take pics upon request. I have too many things to start taking individual pictures. I want to be friendly to those viewing from mobile devices :lol: 92 Ty rear seat...

Ok so my Ty started smoking out the tailpipe and has been gradually getting worse. It's now to the point that if I'm sitting at a light it looks like the truck is on fire and you can smell burning oil. The engine is brand new (well 500 miles if that). Tonight I was working on some other things...

My girlfriend's father passed away over the weekend and I'm trying to sell his Harley for the family. I did some work on this bike myself but I do not know a whole lot about Harley's. I figured I'd throw it up on here as well to see if anyone is interested. I don't even know what it's worth...

I've been having hot start issues pretty much ever since I've had a typhoon. Engine gets up to temp, shut it off, try to restart it and it cranks tries to start once then will crank until the battery goes dead. The only way I can get it start is if I hold the throttle wide while cranking. It...

Been having some problems with my truck getting hot while driving. Just put the truck together and have about 500 or so miles on the build. The engine, radiator and electric fan came right out of my old truck and went into the new one. The only thing I changed was I put an Edlebrock aluminum...

I took my truck to the track on Saturday and I wasn't happy with the hydroboost/4 wheel C5 disc brakes. I could only hold about 5 psi of boost before the truck started pushing through the brakes. What gives?? I spent all this money so I wouldn't have to deall with reving it neutral with vacuum...

I may be blind or just stupid but I'm having a hard time finding the software download need for Ostrich 2.0. I bought an Ostrich from Aaron but he couldn't find the disc to go with it. Does anyone have a link? or can email me the software? I looked all over Code59.org and Moates.net and I'm not...

Hello NASTE folks! Atco raceway is having a swap meet/car show similar to the one at Raceway Park on Saturday March 17th. I'm thinking about taking the Ty and wondering around the swap meet. Then again Atco is 20 mins from my house. Anyone want to go/meet up? Figured I'd throw it out there. I'm...

Anybody have this issue? I have my PLX WBO2 wired to the ECM following the write-ups I've found on here and code59.org. Nolan setup up my .bin with the PLX patch but my digital gauge reads different than what's on datamaster. Makes it tough to tune that way. When I'm steady throttle driving...

I was changing my window felts and when I was popping the clips in on the pass side door panel I broke the plastic on the upper half :banghead: and I just sold a perfect set of door panels. I really only need the upper half. Don't care about the leather bec I'll probably just change it all over...