Search results

Re: energy suspension rear sway bar bushing size? i have been marooned. alright, i can take a hint.

decided to paint front/rear sway bars and noticed the bushings were bad. the fronts had energy suspension part numbers/size on them---easy enough however, the rear sway bar bushings did not. i do not know the brand of sway bar that is mounted but it does go above the rear end if that helps. i...

Re: ZQ8 Quest have you ever tried the grand cherokee box? i was going to try it when i couldn't get a hold of the guy who was selling the zq8s on here. http://www.s10forum.com/forum/f307/92-98-jeep-grand-cherokee-steering-box-quick-ratio-601802/

since i can not find anyone who rebuilds them i am going to try and buy one. if anyone has a good one just laying around and are thinking of selling it and if the price is within my budget i might just buy it. please let me know thank you

Re: 1993 Typhoon #1090 "Shop Truck" does this mean you will not be making a run of the shop truck t shirt design?

Re: looking for afpr in black so i purchased the accufab that you guys recommended and immediately after install i noticed fuel pressure would drop after the fuel pump would finish priming up. my old one was still good so i decided to hold on to it for just such an occasion like this one. i...

Re: What's with all the skulls and metal? i always wondered that myself. my friend is into that and i could never figure it out. same thing with skateboarding when i was a young lad. random people and some distant friends would ask why are all sk8'rs into satan? just because they would see...

Re: Help with front diff needle bearing removal what happened to the posts? am i being marooned. yeah, i've read it many times and i myself can not make sense of it. could not see any mention of the side bearing adjuster screw that i was talking about. after a little more inspecting last...

Re: Help with front diff needle bearing removal terribly sorry i see where i messed up. yes, the front diff. i removed the 10mm bolt and lock tab and tried to unscrew the jogwheel looking thing holding the needle bearing and it started to come out but then stops. is it suppose to stop or is it...

any idea on how to remove bearing? under vehicle right now and i am stumped. do i need to use a puller? if so which one? why is that 10mm bolt there? does it have anything at all to do with that bearing? had a bad c clip on the output shaft so i just now replaced it but there is a little nit of...

Re: Got my new plates today.... "beautiful syclone" :tup:

Re: Interest in stock 18" wheel sets? the rim in your top left corner of every page

Re: Drivers door lock switch mine was near the steering column. it looks like a double relay because the size of it. (side by side) potter & brumfield may be printed on it.

Re: New Headlights from 2010 Infinity looks good! plus, they will have the proper cut off so they wont blind on coming traffic. post pics of the light display if you don't mind

Re: Aluminum Drums not sure if this is what you are talking about but i only have a pic from the post saved to my phone in hopes to find a set for myself someday.

Re: help with front diff i just tried expanding it and still pops out with very little pressure. how much in/out play should there be from the shaft? mine seems to be about a 1/4" or less. is this too much? do i need a new front diff? source for new clip?

so i had to replace the driver side seal and getting the output shaft out was a huge pita. was prying on it from every angle that i could. finally got it with a piece of wood and deadblow hammer. the seal was another pita because the only one offered in town was a little rubber piece that just...

Re: Billet Hood Strut Kit GP thanks! i thought i was going to have a problem with the strut clearing the reservoir cap but it cleared it with no problems. i had spacers ready to put between the res and fender just incase i needed them.

Re: Billet Hood Strut Kit GP werks for fiberglass hoods! thank you look, ma... no hood prop! now with a much cleaner look

Re: Drivers door lock switch just recently i was having a problem with my passenger side interior lock. worked perfectly with the key but not remote (on some days). took it out to grease the slides and nothing. figured it might be the actuator going out. then, i remembered i read on here...