Search results

  1. I

    Front axle seal replacement

    Re: Front axle seal replacement
  2. I

    Front axle seal replacement

    Re: Front axle seal replacement so i finally got it off and out! with a 24oz dead blow hammer and a piece of wood. according to that part number this is what advance gave me
  3. I

    Front axle seal replacement

    Re: Front axle seal replacement thanks again i "searched" and found another thread and they said they used a rubber mallet/dead blow also. i will try that. not much room so i will have to be careful. the sun is boomin' right now so i will have to wait till it cools down a bit
  4. I

    Front axle seal replacement

    Re: Front axle seal replacement appreciate your help, Don but it's just not budging. i am putting my prybar on the heads of the plate bolts and pushing and pulling the bar to try and pop out the shaft. no luck at all! the bar has begun to make contact with the plate's lip and bending it a...
  5. I

    Front axle seal replacement

    Re: Front axle seal replacement werking on this right now so if anyone can answer as quickly as possible that would be outstanding! thank you i've removed all but output shaft. is there a trick to removing this? do i need to pry harder and from 2 sides at once? asking because i do not want...
  6. I

    (3) 2001 zq8 quick ratio steering box's $140 shipped each

    Re: (3) 2001 zq8 quick ratio steering box's $140 shipped each just now seeing this! i will take it.
  7. I

    Forbes put Typhoon in top 10 oddest SUVs... dissapointed!

    Re: Forbes put Typhoon in top 10 oddest SUVs... dissapointed! same drivetrain (awd/single turbo) but updated versions and i wouldn't mind. wouldn't mind at all
  8. I

    Front axle seal replacement

    Re: Front axle seal replacement swell group of guys you are! as always thank you very much!
  9. I

    looking for afpr in black

    Re: looking for afpr in black i don't know how yous guys do it! i came across the accufab but that style never popped up. i could only find the ones with multi ports and bypass ports and nitrous and blah blah blah. thank you very much!
  10. I

    Front axle seal replacement

    Re: Front axle seal replacement silicone?! i thought it was just pop out old seal and pop in new one. looks like i have some reading to do. btw, does it matter what type of silicone to use? red-black-grey? thanks for the heads up.
  11. I

    Front axle seal replacement

    Re: Front axle seal replacement i just found out i need to do this yesterday. forgot all about it. then i see this post so thank you for the reminder! was is it pretty straight forward to do the seal? where did you get the seal from? thanks again!
  12. I

    looking for afpr in black

    does anyone know who sells the afpr in black? i have the one from rpm and it has gotten corroded from the rains while sitting for 2 years. trying to ditch the polished parts i have. the regulator is good and has no leaks. just trying to update the look under the hood. t thank you. forgot to...
  13. I

    SYCLONE vs echoboost

    Re: SYCLONE vs echoboost x2 on the video!
  14. I

    New Big Gun! 10.71 124mph Video/Timeslip

    Re: New Big Gun! 10.71 124mph Video/Timeslip it looks as though the truck is being shot from a sling shot. truck looks awesome! congrats!
  15. I

    wilwood d154 calipers - anybody used them?

    Re: wilwood d154 calipers - anybody used them? yes. both part numbers are direct bolt on. you have the option of choosing a single (120-11870) or dual piston (120-11872). http://www.wilwood.com/Search/PartNoSearch.aspx?q=120-11872
  16. I

    wilwood d154 calipers - anybody used them?

    Re: wilwood d154 calipers - anybody used them? the 1st pic (post 6) is a single piston 2.5" bore with 1.04" rotor the 2nd pic (post 14) are dual pistons with 1.04" rotor to me either one is very tempting over my stock crap. did either of you have to change out your stock brake lines? the...
  17. I

    anything in the werks for an austin area meet?

    just wondering if anything is going to happen for 2015. down for whatever/wherever
  18. I

    Billet Hood Strut Kit GP

    Re: Billet Hood Strut Kit GP you beat me to it! was going to post a pic of mine installed but complications got the best of me. i think it does a lot for appearance.
  19. I

    Billet Hood Strut Kit GP

    Re: Billet Hood Strut Kit GP so, for the record i'm not 100% happy but i do not blame you. i'm not even upset because i know these things happen. i would just like to resolve my issue with the struts. maybe i received steel hood struts instead of the glass hood struts or perhaps these are...
  20. I

    Billet Hood Strut Kit GP

    Re: Billet Hood Strut Kit GP http://www.syty.net/forums/showthread.php?t=100362&page=2 post 18 shows 2 struts. one for metal and one for fiberglass... i can't tell a difference
Top