Search results

  1. ty1435_4.3

    New front hub bearings

    Re: New front hub bearings Yes Zone sells ones called "Value Craft" for $ 114.99 "DONT DO IT" and they sell Timken for $133.99 HTH
  2. ty1435_4.3

    700 r4 2wd

    Re: 700 r4 2wd Well I also got the drive shaft from a 92' 2wd Blazer and I have been driving it but I "NEVER" really bolted it down. Lets just say It was unsafe. lol . I am going to make that plate It sounds like the only solution. Thanks guys
  3. ty1435_4.3

    700 r4 2wd

    Ok I am broke.. No cash LOL... so I have a working 700r4 from a 89 GTA. I went to a junk yard and got a cross member from a 2wd s-10 and NOPE didnt work. So I need to know if anyone else has run into this problem. I need t get this tranny to hook up to this cross member. TIA
  4. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ Tapping the injectors did the trick . Killed the battery cranking LOL. but she fired up. More to come. Thanks all.
  5. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ Im going to try the tapping the injector thing. I cant find my stock injectors or my stock chip for the life of me. SOOO I will keep you all posted. Thank you all for your input.
  6. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ yes the Check engine light is on, There is fuel pressure, there is injector signal , there is spark,I understand the Bad gas thing but the gas still starts the truck. I mean while removing the injectors to check them a bunch of fuel fell in the injector holes and after...
  7. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ there are 2 next to the Alt. and 2 behind the block right?
  8. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ bump
  9. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/
  10. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ bump
  11. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ ok I turned the key and I get 37lbs of fp and it holds the pressure. The pump runs for 2 sec then shut off. And I have the hotwire kit for the fuel pump.
  12. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ yes I checked the harness with a noid light all 6 connectors fire. I have plenty of fuel pressure also dont know exactly what the psi is but there is pressure .
  13. ty1435_4.3

    Stuck injectors???/

    Re: Stuck injectors???/ Yes.
  14. ty1435_4.3

    Stuck injectors???/

    Hello all, My truck has been parked for 2 years. Now I have her ready to fire back up, I have injector pulse and I have spark, she will run for a second with a shot of carb clean. they are 50 lb injectors I got them from RPM a while ago I checked them with a meter and I got 12.3 ohms on each...
  15. ty1435_4.3

    A\C delete box

    Re: A\C delete box Crap I cut off the relay .............. so I will keep the relay and work the hole for the old resistors. So I just cut off the wires for the dryer and a/c comp?????
  16. ty1435_4.3

    A\C delete box

    Re: A\C delete box cool looks good. But I already cut off the relay and other wires just need to know what goes where? TIA
  17. ty1435_4.3

    A\C delete box

    Hey guys Im sure its on here someplace but I cant find it, I need to know how to hook up the 3 wires for the resistors on the box. Im almost with the change over and thats all that is really holding me you. Just need to know which wire goes were? TIA
  18. ty1435_4.3

    Steering shaft

    Re: Steering shaft Do you have any left?
  19. ty1435_4.3

    Steering couplers

    Re: Steering couplers What do you get for them? Do you have a shop here in SC?
  20. ty1435_4.3

    moving to South Carolina

    Re: moving to South Carolina Manning SC here... Welcome
Top