Turbo Blankets: update SYTY PROTOTYPE PICS

[ghettosled]

left message for Julio. I guess he left really early today. Waiting to hear back from him. I'm surprised he hasn't contacted me in awhile. Been really busy to keep tabs on him, but i know many of you are really anxious, so i will have to stay on top of it.

 

[sy538]

any news?

i'll take 1 for intercooler and maybe a stock turbo depending on price

 

[JustBeachin]

Update, I put the blanket on my truck Saturday, haven't had a chance to use DM to monitor MAT's, but they were running about 25-30 degrees above ambient before without the blanket, will run DM and see what it says now.

Fit's good though, a little tough to get on, but not too bad for a "stock truck"

Will have to post pics too.

 

[ghettosled]

just left message for Julio to see what is going on. Will wait back to hear from him. He was supposed to call me when a prototype was finished but i have not heard anything yet.

 

[93ty475]

just left message for Julio to see what is going on. Will wait back to hear from him. He was supposed to call me when a prototype was finished but i have not heard anything yet.

i talked with him a few times and noticed he didn't really return calls the way a business should...maybe theres another contact there that could take over this order...in my opinion, they should be beating your door down to get a sale...or maybe their relocation set them back on turn around time...

 

[AXXE]

Doesn't seem like this is going to happen. Anyone up for putting together a GP on RPM A2A I/C?

 

[93ty475]

Doesn't seem like this is going to happen. Anyone up for putting together a GP on RPM A2A I/C?

i'd probably be down for that...maybe start a thread in the gp section...

 

[AXXE]

I am putting my new motor and turbo in this week. After it's running right, I'll get that started. Glad to see some interest.

 

[93 TY 2185]

just left message for Julio to see what is going on. Will wait back to hear from him. He was supposed to call me when a prototype was finished but i have not heard anything yet.

TTT

 

[JustBeachin]

Update, I put the blanket on my truck Saturday, haven't had a chance to use DM to monitor MAT's, but they were running about 25-30 degrees above ambient before without the blanket, will run DM and see what it says now.

Fit's good though, a little tough to get on, but not too bad for a "stock truck"

Will have to post pics too.

I was able to get mat's on DataMaster, it showed that when it was 63 out, my Mats on fwy were around 83-85-90, I'd say within 20 degrees of ambient. this was using the ultimate t1-16, which bypasses the egr, put it on t1-15 and mats shot up to 110-115.

 

[93 TY 2185]

just left message for Julio to see what is going on. Will wait back to hear from him. He was supposed to call me when a prototype was finished but i have not heard anything yet.

Anything new?

 

[kwick6]

just left message for Julio to see what is going on. Will wait back to hear from him. He was supposed to call me when a prototype was finished but i have not heard anything yet.

Anything new?

Ya, its probably right up there at top priority along with scanmaster. :lol:

 

[AlaskaTy]

Update, I put the blanket on my truck Saturday, haven't had a chance to use DM to monitor MAT's, but they were running about 25-30 degrees above ambient before without the blanket, will run DM and see what it says now.

Fit's good though, a little tough to get on, but not too bad for a "stock truck"

Will have to post pics too.

I was able to get mat's on DataMaster, it showed that when it was 63 out, my Mats on fwy were around 83-85-90, I'd say within 20 degrees of ambient. this was using the ultimate t1-16, which bypasses the egr, put it on t1-15 and mats shot up to 110-115.

When you say Mats, are you talking about IA temp?? I didn't know dm recorded manifold temp separately.

 

[kwick6]

Update, I put the blanket on my truck Saturday, haven't had a chance to use DM to monitor MAT's, but they were running about 25-30 degrees above ambient before without the blanket, will run DM and see what it says now.

Fit's good though, a little tough to get on, but not too bad for a "stock truck"

Will have to post pics too.

I was able to get mat's on DataMaster, it showed that when it was 63 out, my Mats on fwy were around 83-85-90, I'd say within 20 degrees of ambient. this was using the ultimate t1-16, which bypasses the egr, put it on t1-15 and mats shot up to 110-115.

When you say Mats, are you talking about IA temp?? I didn't know dm recorded manifold temp separately.

Ya...... MAT, IAT both the same.

 

[ghettosled]

I have left more messages for Julio, and no response. I guess I just need to get all my parts back. I'll check again on monday though.,

 

[AXXE]

Seems like they are not interested in making them. GP on RPM A2A ?

 

[ghettosled]

well after a long ass wait i finally received the prototypes for the pTE downpipe section and upper intercooler. I took some pics which I will need to load on my site for viewing.

Upon first inspection they look nice and pricey. The intercooler blanket fits nice, and looks to be pretty complete. The Downpipe piece goes all the way down between the frame and looks pretty bulky (not sure if it will fit, and it will most likely rub on the manifold. I think that piece may need some refinements.

 

[0966Sy]

Mike, What kind of price range is the exhuast turbine blanket?

 

[havin-fun]

I'm in for one to depending on the price :k::

 

[SyTyJedi]

Seems like they are not interested in making them. GP on RPM A2A ?

Aye for GP on RPM A2A.

That's 2 :wink: