RazzSyclone. Built By a Chick.

Slyclone

Slyclone

Well-known member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

I have same sandblaster. In my opinion its great new out of the box.

After a couple of neglected uses, it will become dangerious. Some one left sand inside it.
Moisture collected and rusted the inside. Feeding was poor... moving wet sand through hose. It had wormed out the ceramic tip. They work great dont get me wrong. if you dont take care of the sandblaster it wont take care of you. Just dont let sand sit inside.


Truck project looks great Keep Up
 
B

bonesdmz

In Mother Russia Typhoon drives You!
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Slyclone said:
I have same sandblaster. In my opinion its great new out of the box.

After a couple of neglected uses, it will become dangerious. Some one left sand inside it.
Moisture collected and rusted the inside. Feeding was poor... moving wet sand through hose. It had wormed out the ceramic tip. They work great dont get me wrong. if you dont take care of the sandblaster it wont take care of you. Just dont let sand sit inside.


Truck project looks great Keep Up
Click to expand...

Thanks for the tip! :tup:
I'll buy one with a smaller tank.
 
Slyclone

Slyclone

Well-known member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

No no.

Dont get smaller tank. That is the one that is offered. I forget what i paied. I had various. Some small cabinet i got from my friend for doing gun parts. That is a good one. They dont get any smaller than that in that style. Pick one up like that. What i was saying is that they do need to be maitnenced. i guess what i should have said is empty them out before storage. I had blasted certian areas of the GTX and stored it with sand, and it created a problem. Clogging. I wasnt saying to NOT buy... [or get one difrent. thats the style to get. Just buy some medium... There easy, portable just run a line from your compresser like 50-75 ft what ever it is take the thing out back.. its loud. Just get that one there nothing wrong with them.
 
B

bonesdmz

In Mother Russia Typhoon drives You!
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Slyclone said:
No no.

Dont get smaller tank. That is the one that is offered. I forget what i paied. I had various. Some small cabinet i got from my friend for doing gun parts. That is a good one. They dont get any smaller than that in that style. Pick one up like that. What i was saying is that they do need to be maitnenced. i guess what i should have said is empty them out before storage. I had blasted certian areas of the GTX and stored it with sand, and it created a problem. Clogging. I wasnt saying to NOT buy... [or get one difrent. thats the style to get. Just buy some medium... There easy, portable just run a line from your compresser like 50-75 ft what ever it is take the thing out back.. its loud. Just get that one there nothing wrong with them.
Click to expand...

No no, I got your point. I'll get smaller one so it will be easier to empty when I'm done :)
 
n0mab00n

n0mab00n

'Noma GT Fanatic
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

always wanted to see what Mandi looked like & I :squint: partially did :lol:. Mandi I have the UT MOST RESPECT for YOU working on your own vehicle (especially a Sy @ that) most women don't have any drive to do so nor do they want it as they expect men to do it for them. As far as input on paint goes I think the solid raspberry would look killer sitting on those C5 'Vette wheels in Chrome or Black Chrome without question and get a set of those reflective Sy logos from gaugeprower to really set it of (if you go chrome) @ night :tup:. LMFAO Harrrd you're doing more work then most of us guys :rant: Now I gotta get my piece(s) out and get something going to resemble a Sonoma GT again.
 
SYO237

SYO237

SyTy Registry
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

n0mab00n said:
Sy logos from gaugeprower
Click to expand...

you need to do some catching up. you might as well take your money and light it on fire, cause in the same manner, you'd get nothing out of the deal if you gave him money.
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

n0mab00n said:
always wanted to see what Mandi looked like & I :squint: partially did :lol:. Mandi I have the UT MOST RESPECT for YOU working on your own vehicle (especially a Sy @ that) most women don't have any drive to do so nor do they want it as they expect men to do it for them. As far as input on paint goes I think the solid raspberry would look killer sitting on those C5 'Vette wheels in Chrome or Black Chrome without question and get a set of those reflective Sy logos from gaugeprower to really set it of (if you go chrome) @ night :tup:. LMFAO Harrrd you're doing more work then most of us guys :rant: Now I gotta get my piece(s) out and get something going to resemble a Sonoma GT again.
Click to expand...

Thanks for the kudos! I'm actually going with black stockers (I'm over the vette rims, everyone has them) with black syclone logos on the truck :tup:
 
n0mab00n

n0mab00n

'Noma GT Fanatic
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

SYO237 said:
you need to do some catching up. you might as well take your money and light it on fire, cause in the same manner, you'd get nothing out of the deal if you gave him money.
Click to expand...

I don't mean to hijack Mandi's thread but mind filling me in about this then either here or pm?
 
n0mab00n

n0mab00n

'Noma GT Fanatic
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

MRS HARMON said:
Thanks for the kudos! I'm actually going with black stockers (I'm over the vette rims, everyone has them) with black syclone logos on the truck :tup:
Click to expand...

I'm not a big fan of black'ed out stockers/wheels in general but :tup: that's what ya like/want so do it ;)

the black logos should show (maybe kinda look embedded into it?) pretty well against the raspberry .... nice thinking.
 
MRS HARMON

MRS HARMON

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Dave is here (and so are his materials) tomorrow begins paint here are some before pics

IMAG0530.jpg


IMAG0529.jpg


IMAG0531.jpg
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

This should be good. How long is he there for? Is he going to paint the whole thing in one visit? If so, it's like one of those custom shows:lol: I'd say it feels like that in my garage but I am moving with the speed of an old lady with a shopping cart.

Can't to see it when its all done.
 
ImperialStormTrooper

ImperialStormTrooper

New member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

TYTILIDIE said:
This should be good. How long is he there for? Is he going to paint the whole thing in one visit? If so, it's like one of those custom shows:lol: I'd say it feels like that in my garage but I am moving with the speed of an old lady with a shopping cart.

Can't to see it when its all done.
Click to expand...

X2
Will he be there long enough for me to drive up and have him do mine too:lol:?
 
TYHOGG

TYHOGG

Active member
Re: Simple Syclone Rebuild

Re: Simple Syclone Rebuild

Looks like it still needs a lot of disassembling. Can't wait to see the results.
 
You must log in or register to reply here.
Top