Finally Bought A Typhoon! WOOOT!

jjorgensen52

NHSTE - I'm the only one!
Re: Finally Bought A Typhoon! WOOOT!

ShuggsRR said:
So I went to mess with the truck yesterday. Reset the ECM and IAC. Replaced the TPS and MAP from the wrecked Ty. Double checked on vaccum lines and everything seems happy.

Started it up again and it took a few seconds of sputtering until it sounded like it was running fine and then the the idle shot up to 2000 - 2500 again! arrgghhh... Checked the codes again and it said ode 33 - MAP sensor. but no longer says 22 and 35.

I also notice my boost gauge is pegged out top end. It is pegged with the truck on or off. WTF is that? Im SURE its not making that much boost with the truck parked on turned off. haha Any ideas?

So Im reading the service manual to figure out my next steps and everything says "check scan tool" or "use the scan tool" or "after you read the scan tool" Dammit!! What do I need to work on the truck? Do I need a scan tool or can I use my laptop?

I now understand the frustration you guys all have with these. lol

The worst part is... It ran GREAT Thurs night. Great idle, no noises, smooth power, etc etc It was GREAT! Then within an hour the idle was way up. So high Im afraid to put it in gear because it would be like doing a neutral drop.

Code scanner just pulls the codes you're listing, so you're all set there. Try swapping the MAP sensor back again, if it wasn't saying that was bad before ( pegging at idle is also a good indication it's toast :lol: ). I had a bad MAP sensor on my pickup and it wouldn't run at all, after the first week when the idle hunted between 400 and 3000 :roll:
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

jjorgensen52 said:
Code scanner just pulls the codes you're listing, so you're all set there. Try swapping the MAP sensor back again, if it wasn't saying that was bad before ( pegging at idle is also a good indication it's toast :lol: ). I had a bad MAP sensor on my pickup and it wouldn't run at all, after the first week when the idle hunted between 400 and 3000 :roll:

I swapped the MAP after it gave me the code 33. "dont fix it if it aint broke!" :D
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

Ok on my way back up there to see if I can break some more stuff...
 

JSM

Active member
Re: Finally Bought A Typhoon! WOOOT!

sounds like bad map or bad vacuum line, or wiring issue for the map sensor
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

The truck ran great... tursday night about 11pm. When I started it about an hour later it was idling high. So it cant be wiring or anything. Has to be something like vaccum. Would a vaccum leak make the trouble code 33 MAP sensor?
 

Jimmy

Banned
Re: Finally Bought A Typhoon! WOOOT!

ShuggsRR said:
The truck ran great... tursday night about 11pm. When I started it about an hour later it was idling high. So it cant be wiring or anything. Has to be something like vaccum. Would a vaccum leak make the trouble code 33 MAP sensor?
Yep. The MAP reads manifold pressure,so a vac leak would give it fits.i.e make it idle high ect.
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

Jimmy said:
Yep. The MAP reads manifold pressure,so a vac leak would give it fits.i.e make it idle high ect.

So would it be a noticeable leak? Or could it be so small you would have trouble hearing it or seeing a crack?

We have searched all over all the vac lines.
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

Found a leak between the IC and intake... got that solved and I think there is a bit of one by the EGR as well. Would these present a mojoe issue? im sure they would huh?

Changed the plugs as well to NGKs. What a pain in the ass!
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

Found the problem. Replaced the vac lines and little box that sits on the turbo. Two wires going in to it and two vac hoses. Changed that out and the truck runs like a champ!
 

scrape

New member
Re: Finally Bought A Typhoon! WOOOT!

:rotf: :rotf: man thats kick ass. ive been gone all weekend and just caught up on your ty. the old guy spent all that time and money trying to find the prob and it was the alarm the whole time. if he ever finds this thread man hes gonna feel like an ass.:rotf: congrats man :tup:
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

Heh hes really cool. I just emailed him to let him know what I learned and the whole story about the truck so far.
 

MikeRenz

not stock
Re: Finally Bought A Typhoon! WOOOT!

ShuggsRR said:
Found the problem. Replaced the vac lines and little box that sits on the turbo. Two wires going in to it and two vac hoses. Changed that out and the truck runs like a champ!
thats called the boost solenoid. should cost you about $18 at the dealership.
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

MikeRenz said:
thats called the boost solenoid. should cost you about $18 at the dealership.

Thats whats awesome about having a spare parts truck that runs! lol
 

SY756

New member
Re: Finally Bought A Typhoon! WOOOT!

ShuggsRR said:
Found the problem. Replaced the vac lines and little box that sits on the turbo. Two wires going in to it and two vac hoses. Changed that out and the truck runs like a champ!

That's cool you got it figured out Greg.
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

So I tried some new wheels and tires today...

100_8624.jpg


100_8626.jpg


Posing with my next door neighbor's Lightning

100_8627.jpg


100_8630.jpg
 
Last edited:

Quickstop [UK]

Combating adversyty.
Re: Finally Bought A Typhoon! WOOOT!

what are your painting plans? Mine needs a respray as well and i am really worried about how to do it...
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Finally Bought A Typhoon! WOOOT!

WOW BRO under $4500 AND under 90k miles!!!??? All it needs is paint, I mean it has a NEW engine and nice interior!!! ---
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

Quickstop [UK] said:
what are your painting plans? Mine needs a respray as well and i am really worried about how to do it...

Im going all factory original. Green and grey factory paint codes. All stock all original for me. My Tyclone is the modified beast!

Yeah Ima bit concerned but i think with the messageboard and the help of my friends who do body repair... Im in good shape.

alwayscode390 said:
WOW BRO under $4500 AND under 90k miles!!!??? All it needs is paint, I mean it has a NEW engine and nice interior!!! ---

Yeah im pretty excited.
 

ShuggsRR

Donating Member
Re: Finally Bought A Typhoon! WOOOT!

I just detailed the interior... WHOOO its all near flawless except the leather onto of the shifter. I guess he drove with his hand on the shifter and wore the leather.
 
Top