ShuggsRR
Donating Member
Re: Finally Bought A Typhoon! WOOOT!
So my little cleaning project went a little overboard...
The Plan...
Clean and Beautify:
- Take off, blasting and painting all the parts I possibly can pull off the motor (intake plenum, lower intake, intercooler, inner fender, battery tray, accessory brackets, all misc brakets and parts, etc)
Project Run Cooler:
- Running rubber hose through the passenger fender for the intercooler water lines
- Adding a high flow intercooler pump hotwired to always run
- Adding a 7" intercooler fan that will always run
- New 160 degree thermostat
- Volvo electric fan with mounting kit
Project Breathe Better:
- relocate the battery with a small PC680
- make a cold air intake with the stock orange turbo inlet elbow and a K&N filter
- Adding a solid tubo to intercooler pipe
- New silicon connectors from throttle body to intake
---------------------------------
I ordered the following fromSummit Racing, Race Proven Motors, Audiovox, and Detroit Turbo.
- Derale Tornado Electric Fan
- 160 degree thermostat
- NGK UR5 Spark Plugs
- Odyssey Drycell PC680 Battery
- Odyssey SAE Automotive Terminal Kit
- Trans Cooler install kit
- Standard Motor Products Fuel Injector O-Rings
-Summit By K&N Replacement Performance Air Filter
- Johnson SyTy Intercooler Pump
- Mr. Gasket Thermocap Radiator Cap
- New Prestige alarm remote
- 20 foot 3/4" heater hose
- hose elbows
- Water pump
Gaskets:
- Victor Reinz Lower Intake Gaskets
- Victor Reinz Valve Cover Gasket
- Victor Reinz Upper Plenum Gasket (SyTy)
- Victor Reinz Throttle Body Gasket (SyTy)
- Fel-Pro Water Neck Gaskets
- GM Thermostat gasket
- GM Syty Timing Cover Gasket kit
Oh! And a t-shirt!
So my little cleaning project went a little overboard...
The Plan...
Clean and Beautify:
- Take off, blasting and painting all the parts I possibly can pull off the motor (intake plenum, lower intake, intercooler, inner fender, battery tray, accessory brackets, all misc brakets and parts, etc)
Project Run Cooler:
- Running rubber hose through the passenger fender for the intercooler water lines
- Adding a high flow intercooler pump hotwired to always run
- Adding a 7" intercooler fan that will always run
- New 160 degree thermostat
- Volvo electric fan with mounting kit
Project Breathe Better:
- relocate the battery with a small PC680
- make a cold air intake with the stock orange turbo inlet elbow and a K&N filter
- Adding a solid tubo to intercooler pipe
- New silicon connectors from throttle body to intake
---------------------------------
I ordered the following fromSummit Racing, Race Proven Motors, Audiovox, and Detroit Turbo.
- Derale Tornado Electric Fan
- 160 degree thermostat
- NGK UR5 Spark Plugs
- Odyssey Drycell PC680 Battery
- Odyssey SAE Automotive Terminal Kit
- Trans Cooler install kit
- Standard Motor Products Fuel Injector O-Rings
-Summit By K&N Replacement Performance Air Filter
- Johnson SyTy Intercooler Pump
- Mr. Gasket Thermocap Radiator Cap
- New Prestige alarm remote
- 20 foot 3/4" heater hose
- hose elbows
- Water pump
Gaskets:
- Victor Reinz Lower Intake Gaskets
- Victor Reinz Valve Cover Gasket
- Victor Reinz Upper Plenum Gasket (SyTy)
- Victor Reinz Throttle Body Gasket (SyTy)
- Fel-Pro Water Neck Gaskets
- GM Thermostat gasket
- GM Syty Timing Cover Gasket kit
Oh! And a t-shirt!
Last edited: