Search results

I just picked one up from an astro van that has been reclocked it fit fine just have to use a dremel to attach the bolt to the shaft coming through the firewall .

Here is a few pictures

Its back on the truck now decided too keep it.

I used the acdelco advantage series it rides fine I did get an alignment done too .

I changed my mind thanks

ill take the tail,side marker and the turn signals send me your info

Thanks alot Dave do you know what size ?

looking for the turbo drain o-ring for the oil pan .

The front differential rubber bushings havent been changed

I have been dealing with a drivers side front end popping when turning the steering wheel here is everthing that I replaced All control arm bushings Ball joints Inner/outer tie rod ends Idler arm Swap cv shafts twice Torsion mounts Sway bar bushings I'M thinking about replacing the axle...

still here

Thats what Im running with a Hood tuned chip and egr deleted mostly stock .

I just bought the 2020 red one at the flea market today for 2 bucks .

Its been a while I didnt notice any height issues on the mount I did drill out the JRT mounts and went too a grade 8 bolt I cant remember the size .

Everything I buy I search for the best deal always look at resale value when I was younger I had a custom show truck ( gmc jimmy) air ride suspension , custom paint and a bunch of other stuff had over 20k sold it for 6k . I just sold my corvette c5 pretty much stock sold for all as much as I...

I used these from what I remember I removed both wheel wells , front bumper along with the intercooler and steering box along with an engine hoist https://jagsthatrun.com/collections/chevy-s10/products/s-10-4-3-v6-replacement-mounts-for-1988-2004-s-10-trucks-blazers

Check the upper intake plenum gasket

I need to try too find some oem ones

Mine are aftermarket and need replaced .

I just bought ac delco struts at rock auto