32 Spline Transfer Case Input Shaft

[Norm]

Re: 32 Spline Transfer Case Input Shaft

So where do you get an adapter?

Here's one source:

http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26

 

[craig jones]

Re: 32 Spline Transfer Case Input Shaft

Here's one source:

http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26

Thats where Im getting mine . I believe Mike is the only one that has them now.

 

[jasonpickett]

Re: 32 Spline Transfer Case Input Shaft

Since a lot of people need them see why doesn't someone see if he can do a group buy.

 

[tbauer03]

Re: 32 Spline Transfer Case Input Shaft

I would be in for a group buy on the adapter and cross member if others are interested.

 

[craig jones]

Re: 32 Spline Transfer Case Input Shaft

Im in for GP on adapter. Already have JSM crossmember but need shifter cable, shifter linkage and and what ever else is needed for conversion. Make this in a Poll? anyone ?

 

[jasonpickett]

Re: 32 Spline Transfer Case Input Shaft

Let me make this CLEAR!!!!!! Mike never said anything about a group buy. I just wanted to see if someone wanted to try to get one going. I don't want him to chime in and think that we already have a group buy going because we don't.

 

[craig jones]

Re: 32 Spline Transfer Case Input Shaft

Let me make this CLEAR!!!!!! Mike never said anything about a group buy. I just wanted to see if someone wanted to try to get one going. I don't want him to chime in and think that we already have a group buy going because we don't.

Wow! I figured that but if Mike seen the demand maybe he would do one . Thats why I mentioned a poll to see how many people did need one. Sorry on my end.

 

[jasonpickett]

Re: 32 Spline Transfer Case Input Shaft

No my main concern is people start pming him for a group buy or to be part of a group buy that didn't exist, yet atleast.

 

[craig jones]

Re: 32 Spline Transfer Case Input Shaft

No my main concern is people start pming him for a group buy or to be part of a group buy that didn't exist, yet atleast.

PM sent . I know where you are comming from and agree with you .

 

[tbauer03]

Re: 32 Spline Transfer Case Input Shaft

This it fully understood and we are just showing interest to hopefully help the cause

 

[JSM]

Re: 32 Spline Transfer Case Input Shaft

Jeremy shipped the first 7 shafts today out.

If you guys want to get me a list of how many adaptors/crossmembers I might be game to do 1 run. All those tools are still available.

 

[turbodig]

Re: 32 Spline Transfer Case Input Shaft

That would be picked up at homecoming 2010 not nats 2011 in Denver.:tup:

I have them at my place will work on boxing them up nice and tight this weekend and start shipping'em next week.

Please note that they all will not go out monday. I am shipping them out as they were ordered and payed for. #1 first, then #2, etc. Should have them all shipped by end of next week. Unless Jeff gets off his ass and comes up and helps with labels and boxing them up.

Also Jeff needs to draw up a diagram with instructions on shortening 4l80e stock 4wd output shaft by 3/8"-1/2".

You can send mine with Jeff to HC, unless you've already sent it... save on all the boxing/shipping.

 

[dgoodhue]

Re: 32 Spline Transfer Case Input Shaft

You can send mine with Jeff to HC, unless you've already sent it... save on all the boxing/shipping.

Same here

 

[ziembic]

Re: 32 Spline Transfer Case Input Shaft

I would be interested in the adapter and cross member.

 

[JSM]

Re: 32 Spline Transfer Case Input Shaft

Looking at what Mike offers I doubt I could do any better on the adaptor plate than his normal price. I could match it but that doesn't really make a good GP does it?

As far as crossmembers go if we can get 5 I can do those for $200 each + $20 ship. (US address).

 

[dgoodhue]

Re: 32 Spline Transfer Case Input Shaft

Looking at what Mike offers I doubt I could do any better on the adaptor plate than his normal price. I could match it but that doesn't really make a good GP does it?

As far as crossmembers go if we can get 5 I can do those for $200 each + $20 ship. (US address).

I have one your 700r4 tubular crossmembers, I imagine the 4L80 has a further rearward mount. Would it be difficult to convert one of those to fit a 4L80E?

 

[95xtreme]

Re: 32 Spline Transfer Case Input Shaft

You can send mine with Jeff to HC, unless you've already sent it... save on all the boxing/shipping.

You could do the same with mine if you have not sent it yet aswell.

 

[JSM]

Re: 32 Spline Transfer Case Input Shaft

They are really built differently, similar flanges but different bends, etc.

 

[craig jones]

Re: 32 Spline Transfer Case Input Shaft

Looking at what Mike offers I doubt I could do any better on the adaptor plate than his normal price. I could match it but that doesn't really make a good GP does it?

As far as crossmembers go if we can get 5 I can do those for $200 each + $20 ship. (US address).

In that IMO I figure GP on adapters are not worth doing. Mike has a good price on his .

 

[tbauer03]

Re: 32 Spline Transfer Case Input Shaft

Looking at what Mike offers I doubt I could do any better on the adaptor plate than his normal price. I could match it but that doesn't really make a good GP does it?

As far as crossmembers go if we can get 5 I can do those for $200 each + $20 ship. (US address).

I am interested, In the cross member. Can they be powder coated as well?
Really I am interested in everything to make the conversion possible if any vendor out there wants to sell something in a kit form that would be appreciated.
Looking forward to getting my input shaft,
Thanks for everything.
-Ted