Search results

Re: Will not start Update: still not starting. getting 50 psi at rail. Now only fires on ether but will not stay running. I tested the lead to the fuel relay as the manual suggests and the test light is not lit but lights slowly when cranking, didn't know if that indicates a problem. I was...

Re: Will not start Thanks for all the great suggestions. Tested the wire and each tested fine as did the paper clip code test. Will be looking to get a shorter wire just to clean things up with the ECM. The battery was brand new (maybe 2 months old) when the problem started. Its an interstate...

Re: Will not start Tried disconnecting the oil pressure sensor and it fired up without either and idled fine but did stall out when given gas (still in park). Would this be that sensor, would a fuel regulator be a culprit?

Re: Will not start I will try to disconnect the relay worth a shot. Has a moates adapter and 59 tune. Not sure which map sensor or really the injector type they have the red stripe Sorry I'm still new when it comes to the electrical/computer end. It has been very frustrating but learning a...

Re: Will not start It has gotten out of control I agree Truck cranks but will not start without ether. Then runs great. Last time I drove it, it would stall out if I gave it any gas to accelerate (normal driving) Checked all wires, grounds and vacuum lines Tested tps and temp and seem ok...

Re: Will not start new ecm same results did sound like was going once for a second but nothing

Re: Will not start Thanks for the tip I'm going to try a new regulator and the triple check all the lines and see then try the ECM, Thanks for the offer on the ECM I may just buy one to have a spare as well regardless. I will pm if want to just try one Is there any place I can get a stock...

Re: Will not start I have tried to unplug the TPS didn't have any affect going to look towards the ecm route see what I can find there. Seems like I am searching for needle in haystack.

Re: Will not start I'm at a total loss what to try next. Any thoughts on what to look at? Only problem I can find is the remote oil line leak that comes standard.

Re: Will not start I am looking at sensors as problem now. Which ones would prevent fuel, ignition and injector firing on start up?

Re: CEL/Dies when gas applied Re: CEL/Dies when gas applied Was having the same trouble still have not found the reason but mine only starts with ether. I have new plugs wires filter ignition module and fuel pump. Does yours start right up normal? Seeing the code 12 as well does the flash...

Re: Will not start Was getting 47 psi on the old pump but after I drove it last and it stalled out whenever I would put any pressure on the gas while driving I replaced the pump. Has new filter and runs with the help of starting fluid. Pump is definitely running.

Re: Will not start Got the new Walbro pump in took out pulsator when I did. Whet to start and same crank with no go. Again fired right up and ran fine after a shot of either. I'm at a loss where to go next. Sensors?

Re: Will not start replaced the pump. What is the purpose of the pulsator? Been reading to just get rid of it. Also there was an o ring on one fuel line attaching to the sending unit. should there be one on both? anyone have a part # or size?

Re: 92 Ty part out looking for ecm, the part of the door panel covering the lock and handle(with window switch cover), turbo oil return line and seats

Re: Will not start Going to order the Walbro pump from racetronix http://www.racetronix.biz/Customkititems.asp?ic=FPA-013&kc=1&iQty=1&Source=VC&eq= do I need the hotwire kit or will it be fine with out it? I am looking for reliability for daily driving

Re: Will not start is this pump anything to consider? https://www.rockauto.com/catalog/moreinfo.php?pk=978009&cc=1164439

Re: Will not start Thinking I am going to break and replace the pump as that seems to be the most likely culprit at this point. Walbro 255 from what I have been reading is a common and good replacement. Wanted to make sure or if I have other areas in the system left to check before dropping the...

Re: Will not start Finally got time to test the TPS (hopefully correctly) as described. With key on it was showing between 1 and 2 and full throttle was just below 4. Took a few tried since hasn't been run in a while but as has been the cases with starting fluid started and ran perfect once...

Re: Will not start The tach did flutter more with the sensor disconnected. I followed the sequences for no start only thing that I seem to find is the noid light test I do not get it to light up.