wiring

[wannabclone]

i am trying to transplant a sy eng in my 95 and the wiring stuff is killin me so can any one tell me what is the lil disrnution bllock on the back fire wall left of the cap is for and where do the wires go ...also how can i get a pic in the forum
much luv to the(sy/ty) decade of kickass

 

[V6 Kompressor]

For a 95 something, go to the http://www.S-Series.org website...There are at least 4 people on that board that have done the swap with a late model body style... You would have been better off to do this with a 93 or earlier pick up, or a 94 or earlier s-blazer/jimmy, because of the wiring harness... Donate to this website and I will mail you a set of prints for your 95 something and a set of ecm prints for the 91 sy or the 92/93 ty... Scince there is no email address attatched to your thread, post it here if you agree... Kieth will let me know if the donation has been made... Or spend about $30 at your local auto zone and buy both haynes manuals for the sy and the 95 something....

 

[wannabclone]

i have both books but till dont know what that wire does

 

[V6 Kompressor]

If your talking bout the block on the 95, it is for 3 relays, if you are talking about 91 - 93 sy/ty's that is 12v hot all the time, from the battery... It should be shown on a power distribution schematic.. I believe JB-1, I'll look it up tommorow and let you know what is supposed to hook up there...

 

[wannabclone]

needed

needed

i need the wire that goes between the coil and the dist or need to know what it is called to tell the guy behind the counter what it is..the people in s fl r not that helpfull