stock crank limit

[clone 94]

Re: stock crank limit

how much meth were you spraying? we have 60lbhr injectors which flow more like 72ish lbhr with our fuel pressure. with 13psi we are at 85% duty cycle. how big is that pte61? the way this thing runs with 13psi i would be scared at 20+psi.

i cant speak for Tim but i ran a very small amount of meth. my 50# inj. were at 90%dc at 25 psi and 5k rpm. i had plans to tune for much more meth to lessen the load on my injectors but then i decided to pull the motor for something a bit more serious

the pt61 uses the gt35 compressor wheel, 61mm inducer. there are compressor maps all over for that wheel. pt61 only indicates the comp wheel size. my turbo was the 6152e, garret t-350 exh wheel and an e compressor cover (3 in 2 out).

its a decent sized turbo, has pushed some GN's into the 10's

 

[midnightbluS10]

Re: stock crank limit

May I ask you a question?

Will stock 4.3 (Bravada) heads work on a Typhoon 4.3?

Thanks,
Randy

What year Bravada? 92-95, yes with no other changes. 96+ takes a bit of doing.

 

[4.8t]

Re: stock crank limit

i cant speak for Tim but i ran a very small amount of meth. my 50# inj. were at 90%dc at 25 psi and 5k rpm. i had plans to tune for much more meth to lessen the load on my injectors but then i decided to pull the motor for something a bit more serious

the pt61 uses the gt35 compressor wheel, 61mm inducer. there are compressor maps all over for that wheel. pt61 only indicates the comp wheel size. my turbo was the 6152e, garret t-350 exh wheel and an e compressor cover (3 in 2 out).

its a decent sized turbo, has pushed some GN's into the 10's

ok so this turbo is a bit bigger then. there was a couple guys that stuff a 5.3l in a ford fairmount with this turbo and went 9's. pretty crazy stuff.

 

[firstsy]

Re: stock crank limit

how big is your turbo? we are using a 70mm. t70 master power turbo.

72mm

 

[4.8t]

Re: stock crank limit

how much power did it make?