Meet @ ViciousV6 House On Sunday July 1st

[6UndrPressr]

Re: Meet @ ViciousV6 House On Sunday July 1st

hmmm ill make a nice challenge to anyone to come beat my numbers on the dyno and beat me at a light....=)....now i just need to put it back together

 

[Raist103]

Re: Meet @ ViciousV6 House On Sunday July 1st

im 90%in and for dyno i would like to come see dyno maybe run depending on price, not to tune just for numbers

 

[alwayswantedone]

Re: Meet @ ViciousV6 House On Sunday July 1st

I should be able to make it. Did you ever get a price for the dyno?

 

[ViciousV6]

Re: Meet @ ViciousV6 House On Sunday July 1st

Dyno price should be 65-75 bucks for 3 pulls, they are just pulls no tuning. This he said will be the last dyno session meet for this price he will be changing it to atleast 100 or more after this session is over. I am going to try and have him make me some shirts up so i can sell them too with Syclone/Typhoon Dyno Day on them, i think he normally sells them for like 10-15 bucks per shirt and they look really cool.

My baby may be able to see alittle Dyno action too since Keith is installing my new downpipe, finishing the alky kit today, and the tranny should be fixed and ready to rock and roll my then. Just have to make a decision to get a 4L80E or Redo 700R4. I am swaying toward the 4L80E since i am getting into that 10 sec bracket. We will see as i get to talk to George and My tranny guy @ Aamco.

Ralph
ViciousV6

 

[crazykaese]

Re: Meet @ ViciousV6 House On Sunday July 1st

I'll there for sure - I'll watch the dyno fun but won't subject my truck to it. Count me in.

 

[SY1616]

Re: Meet @ ViciousV6 House On Sunday July 1st

Jen and I will be there, likely most of the dyno (just to watch) and all of the bbq. Looking forward to it!

 

[NOWAY55]

Re: Meet @ ViciousV6 House On Sunday July 1st

Count me in. July 1 is wide open for me.

Can I get my impala dynod? I am curious what it is putting out.

I tried once before @ Evolution Performance and the thing almost jumped into the wall, so we took it down and didn't get any good numbers on it.

FWD is that an issue?

 

[SY1616]

Re: Meet @ ViciousV6 House On Sunday July 1st

FYI, Sy1172 and SY1616 is the same, Vince and Jen in Perkasie, PA.

 

[6UndrPressr]

Re: Meet @ ViciousV6 House On Sunday July 1st

FWD is not an issue on the dyno that is gonna be used

 

[ViciousV6]

Re: Meet @ ViciousV6 House On Sunday July 1st

Count me in. July 1 is wide open for me.

Can I get my impala dynod? I am curious what it is putting out.

I tried once before @ Evolution Performance and the thing almost jumped into the wall, so we took it down and didn't get any good numbers on it.

FWD is that an issue?

Nope, We do them all the time, Cobalts, Civics, SRT-4, you name its been on the dyno.

 

[ViciousV6]

Re: Meet @ ViciousV6 House On Sunday July 1st

Well it is 2:00 am and i just got home from getting new Downpipe/wastegate made and also custom aluminum alky tank. We went out and did some wastegate test and its nuts on within couple tenths of a pound. Just gotta finish the alky kit and it will be going to get tuned "after i address the tranny issue"

Ralph
Viciousv6

 

[alwayswantedone]

Re: Meet @ ViciousV6 House On Sunday July 1st

Need some pics of the new dp. You went 3.5" right?

 

[ViciousV6]

Re: Meet @ ViciousV6 House On Sunday July 1st

Need some pics of the new dp. You went 3.5" right?

Yea we couldn't or didn't want to fit the 4 inch pipe it was real real real tight and the 3.5 fits nice with enough room to spare around it. Next we are going to do a full mandrel 3.5 exhaust with a corsa muffler. After i fix the transmission and few other concerns vut it ran good last night "got boost" control now. Thre pics will not have a wastegate pic since it is a new MPE prototype and he asked me not to post pics of it until he starts making them.
Its a 60mm gate.

Pics will be posted with in the hour.

Ralph
ViciousV6

 

[KFC_Or_Bust]

Re: Meet @ ViciousV6 House On Sunday July 1st

Count me in for the first...Even if my Braphoon isn't running I'll show up with my beater Blazer if that's ok.

 

[ttypewe4jim]

Re: Meet @ ViciousV6 House On Sunday July 1st

Count me in for the first...Even if my Braphoon isn't running I'll show up with my beater Blazer if that's ok.

*thread hijack*

Hey dont you post on fuel slut sometimes?


Ralph you can diffently count me in hoping to have the ty going by then I dont see any reasons why not

 

[ViciousV6]

Re: Meet @ ViciousV6 House On Sunday July 1st

*thread hijack*

Hey dont you post on fuel slut sometimes?


Ralph you can diffently count me in hoping to have the ty going by then I dont see any reasons why not

Not me, Just on here and Trailvoy. Only 2 sites oh and the LS1 boards sometimes.

Ralph
ViciousV6

 

[KFC_Or_Bust]

Re: Meet @ ViciousV6 House On Sunday July 1st

I think he was talking to me....

Yes I have the same name on FS and pretty much any other site I post on too.

 

[crusader8]

Re: Meet @ ViciousV6 House On Sunday July 1st

What a crappy list...I think Ill be there...got a graduation party on the 30th then might come back to brick on the first and maybe stay for the 4th depending on work

 

[6UndrPressr]

Re: Meet @ ViciousV6 House On Sunday July 1st

fuel slut..oh boy the home of the non racers, lol

 

[KFC_Or_Bust]

Re: Meet @ ViciousV6 House On Sunday July 1st

I suppose? I wouldn't know I've never actually met anyone on there, I'm usually on there for the Video forum, some good shit gets posted there most of the time.