HID head light conversion interest?

[jjorgensen52]

Re: HID head light conversion interest?

I see what you are saying about the black part. I wont be able to go chrome with it, but I could do a bright silver...that make it better? I dont think I can paint the heat shield however, thats a high temp paint, may discolor from the heat.

As far as the beam pattern mounted, look at the first picture, then remove roughly the back half of the ground light, and that would be what you get... I know its unscientific, but I just dont have a truck to mount it to.

I would be willing to do this though, if someone didnt like the beam pattern once installed, money back guarentee, minus shipping.

Coloring the ring would help, What I was referring to though was actually making a fake reflector to attach there and hide the housing behind. Something lke:

Where the yellow lines are the existing internal reflector of the housing and the grey lines represent a shield (aluminum or something like that) which makes the interior of the lamp uniform and hides the HID housing (if also making it shallower, but that is trivial)

Another note, I would be more than willing to offer my truck as a guinea pig for testing the lights as compared to my current SilverStars

 

[TURBOV6]

Re: HID head light conversion interest?

You guy are spending too much time on this hid conversion kits all you need is a simple bolt on kit. As I mentioned before the bulb will make a HUGE difference with the shield on it. Those lamps with the projectors are cheaply made I had one and tried it out I tossed it in the trash after I seen the quality on it. And plus that lamp little projector don't do much anyways because the whole lamp will still light up. That is just my 2 cents.

 

[redneckwonder]

Re: HID head light conversion interest?

Just wanted to update you guys, nothing is happenin this week due to my final exams...I am however going to be getting a forum in the vendor section, so that I can support the forum that supports me, and hopefully provide more clear explanations and product ideas. Keep watchin!

 

[Flyin Ryan]

Re: HID head light conversion interest?

Just wanted to throw this post out there.. it was a really good post and i now realize I have euro spec Hella H4 housings which is prob why my cutoff isn't bad at all with the bi-xenon HID kit I have.

http://www.syty.net/forums/showpost.php?p=86521&postcount=9

at the bottom of his post you'll see his cutoff and it looks pretty much the same as mine

 

[SYTY66]

Re: HID head light conversion interest?

Any update on this?

 

[4rs fed]

Re: HID head light conversion interest?

$240 shipped for the set i had in my typhoon

this is brand new

 

[TURBOV6]

Re: HID head light conversion interest?

I can still do these hid conversion kits if I still see interest in it. But need to know a few days because the hid factory in china will close in less than 5 days from now.

The kit will be $250 shipped and $300 shipped for the H4 H/L or they call bi-xenon (same one ryan has). The lamps I included no is "DOT" approved.

I have updated my hid kits with a newer "unique" longer lasting smaller hid ballast. My bulbs are still one of the best xenon bulbs in the market now. So my kits are not those cheap $99 hid kits sold on e-bay.

 

[4rs fed]

Re: HID head light conversion interest?

$240 shipped for the set i had in my typhoon

this is brand new

My $240 kit is the h/l kit :tup:

 

[4rs fed]

Re: HID head light conversion interest?

and here are the pics again

that kit shown is a blue 10K kit :myclone:

 

[TURBOV6]

Re: HID head light conversion interest?

My $240 kit is the h/l kit :tup:

Both kits are has the high low feature

 

[Flyin Ryan]

Re: HID head light conversion interest?

what about fog lights.. what kind of pricing would we be looking at for hid fogs?

 

[4rs fed]

Re: HID head light conversion interest?

what about fog lights.. what kind of pricing would we be looking at for hid fogs?

$180 plus shipping for the fog light kit which includes the super small ballasts

 

[TURBOV6]

Re: HID head light conversion interest?

what about fog lights.. what kind of pricing would we be looking at for hid fogs?

Ryan $170 shipped and also with the smaller ballast.

 

[akwilks]

Re: HID head light conversion interest?

Whats the story? I want my HID conversion!!!

 

[Flyin Ryan]

Re: HID head light conversion interest?

welp, my hid fog light purchase will have to wait until I sell a pc.... my 5 month old 140 amp alt is spent!

 

[redneckwonder]

Re: HID head light conversion interest?

4rs fed,

Wall shots at 25 feet please. Head on shots are extremely deceiving.

 

[4rs fed]

Re: HID head light conversion interest?

4rs fed,

Wall shots at 25 feet please. Head on shots are extremely deceiving.

trucks been sold

whats so "deceiving" about an hid kit???

 

[TURBOV6]

Re: HID head light conversion interest?

welp, my hid fog light purchase will have to wait until I sell a pc.... my 5 month old 140 amp alt is spent!

Ok ryan let me know and I will give you a good deal my friend..... :rotf:

BTW would you have the windows cd for the IBM? Or any cd's that came with it? I need to reinstall windows...

 

[Flyin Ryan]

Re: HID head light conversion interest?

Ok ryan let me know and I will give you a good deal my friend..... :rotf:

BTW would you have the windows cd for the IBM? Or any cd's that came with it? I need to reinstall windows...

sent you a pm about the restore disc question man

 

[redneckwonder]

Re: HID head light conversion interest?

trucks been sold

whats so "deceiving" about an hid kit???

output and glare. its a hazard to you, your truck, and everyone else on the road unfortunately.