Ed Hess at Atco..

Status
Not open for further replies.

Daron

Active member
Re: Ed Hess at Atco..

Nah... Ed talked his share of smack. Anders is rightly proud of what Roberts truck does and prolly wonders how long it will hold its record... Ed s setup seems to have the goods. Id be curious by how much it is gonna "beat" roberts time too.
 

Nova67ss

New member
Re: Ed Hess at Atco..

Daron said:
Nah... Ed talked his share of smack. Anders is rightly proud of what Roberts truck does and prolly wonders how long it will hold its record... Ed s setup seems to have the goods. Id be curious by how much it is gonna "beat" roberts time too.

Thanks, Daron

Thats exacly what I´m curiose about, nor Robert, Hoover or Ed have somebody to talk to about running the Sy´s fast and progres is only seen in timeslip´s, of course we want to know how our competitor is doing..

Ed was in the "run" for the first 8, he didnt take the chance, Hoovers stumbled Oh so close then a engine failure stoped them, and Robert took the chance..

Ed has promised easy 8 sec runs and to be worlds fastest Sy (but acording to rumors the real fast ones runs 7 and lurkin´s in the woods ;D ) also promised this to bee Soon.
I say do that.. is that BS???

He has also gone a bold way with gearing and tire dimesions (I personal think this is not gona work but thats MY opinion) but never the less, its a combination thats untested,

This is the way ALL 3 of these gentlemen had to walk... testing new ideas over and over again, and IF they find some improvement the others have to figure it out..and in the long run the recepie for a "poundkake" is "at the feet" for the rest of U

We over here is making plans for the -07 season to dig in deeper in the 8, of course I whant to know how´s Ed doing, thats one way to "set the rally point" for us, when brainstorming on swedish coffe (that U´ve heard before :D )
 

Nova67ss

New member
Re: Ed Hess at Atco..

QUICK STORM said:
anders is a CHEF?

Swedish CHEF?? no way, or maybe.. hm have to figure on that, My son likes my pancakes and special mashed potatoes and meetballs :D

Pulling your leggs :D..
 

mhoover

Member
Re: Ed Hess at Atco..

Anders said:
(but acording to rumors the real fast ones runs 7 and lurkin´s in the woods ;D ) also promised this to bee Soon.
I say do that.. is that BS???

Anders! i can ASSURE you this is not BS........ I dont know about how "soon" but its gonna happen :)

MATT
 

Mad Mike

SYCOSIS
Re: Ed Hess at Atco..

Nova67ss said:
I whant to know how´s Ed doing, thats one way to "set the rally point" for us, when brainstorming on swedish coffe (that U´ve heard before :D )[/QUOTE

Why are you so worried about someone who hasn't even ran an 8 yet? He's a whole .147 seconds behind the fastest time. ;) Even though, I'm sure he appreciates the respect your showing him.
 

Nova67ss

New member
Re: Ed Hess at Atco..

Mad Mike said:
Why are you so worried about someone who hasn't even ran an 8 yet? He's a whole .147 seconds behind the fastest time. ;) Even though, I'm sure he appreciates the respect your showing him.


For the first, to know how your Competitor does out on track is to be prepared to what action U have to make to ceep ahead of the "game"..

IF Ed ( Matt I belive U, Q is when? ) does run that 8, I wants to see a video of the launch and the timeslip to evaluate the tracktion, the power output and chassie reaction,the strong part of the run and the week spots.. and do some "smart thinki´n" on how Robert will be planing for next season,

Just some minor tune? or some radical stuff..?

Thats the way to be ahead of your aponent´s..
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Ed Hess at Atco..

there was a video floating around of a syclone that ran mid 8's right before the nat's. I still don't know who's truck it was and haven't even tried to find out. But i am sure it will surface soon enough.
 

Nova67ss

New member
Re: Ed Hess at Atco..

Syborg Twin Turbo said:
there was a video floating around of a syclone that ran mid 8's right before the nat's. I still don't know who's truck it was and haven't even tried to find out. But i am sure it will surface soon enough.


That would be realy intresting, MAY it be Hoovers, with the new owner???
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Ed Hess at Atco..

Nova67ss said:
That would be realy intresting, MAY it be Hoovers, with the new owner???

not really sure who owns it. But from memory the Hoovers still owned there truck when the video was posted.
 

crusader8

Running Ty Club
Re: Ed Hess at Atco..

thats messed up, go and tell us about an 8 sec truck for the first time and go and say you dont know anything and dont post a vid or anything...

Who knows maybe it was the 1/8th mile
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Ed Hess at Atco..

crusader8 said:
thats messed up, go and tell us about an 8 sec truck for the first time and go and say you dont know anything and dont post a vid or anything...

Who knows maybe it was the 1/8th mile

actually as fast as the video went up it came down. I wish i new more but i don't.

What i can tell you it was a 1/4 mile run.
 

Nova67ss

New member
Re: Ed Hess at Atco..

Maybee its like that LOOOW 9.2 sec polish Ty. it run low 9 in poland. the video was not telling what lenght the airstrip "home made" trac had..
But in Norway,Sweden and Belgium (chimay) the fastest time have been a low 10, with loots of noz..

But Id realy want to se a mid to low 8 sec run from a streetlegal AND driven bouth on trac and public road Syclone, and for now theres only ONE thats done it and prove it too.
 

MikeRenz

not stock
Re: Ed Hess at Atco..

um...robert didn't run a mid to low 8...not yet anyway. unless you're withholding something from us :lol:

I heard about this supposed mid 8 second syclone before and have never found the video that is "floating around". Guess i'm just not meant to be in the path of this video's float pattern :(
 

TT350

Manufacturer
Re: Ed Hess at Atco..

IMO an 8.98 is like getting just your finger wet on the first date but telling all your buddy’s your were hitting it all night. :lol:
 

Tommyquest

The Member's Member
Re: Ed Hess at Atco..

TT350 said:
IMO an 8.98 is like getting just your finger wet on the first date but telling all your buddy’s your were hitting it all night. :lol:
THAT is funny.
 

JSM

Active member
Re: Ed Hess at Atco..

TT350 said:
IMO an 8.98 is like getting just your finger wet on the first date but telling all your buddy’s your were hitting it all night. :lol:

Maybe, but I suspect that someone next year might change their name to Ron Jeremy next year.
 

mhoover

Member
Re: Ed Hess at Atco..

TT350 said:
IMO an 8.98 is like getting just your finger wet on the first date but telling all your buddy’s your were hitting it all night. :lol:

HA HA HA HA :lol: :lol: :lol:
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Ed Hess at Atco..

Nova67ss said:
But Id realy want to se a mid to low 8 sec run from a streetlegal AND driven bouth on trac and public road Syclone, and for now theres only ONE thats done it and prove it too.

are we now adding more rules into the 8 second pass.

so now you have to drive the truck to the track and home to be the king.

Granted Roberts trucks is awesome and i commend him for all of his hard work.

But a low 8 second pass is an 8 second pass no mater how the truck is set up.
 

Nova67ss

New member
Re: Ed Hess at Atco..

TT350 said:
IMO an 8.98 is like getting just your finger wet on the first date but telling all your buddy’s your were hitting it all night. :lol:


That coment is so dam funny :D ROTFLMAO :D

And as described, most of us made it under the blouse on the first date (barely) and was braging about a "wet finger" hahahahahaha.




JS Manufacturing said:
Maybe, but I suspect that someone next year might change their name to Ron Jeremy next year.


Jeff my friend, think U are so right about this :D , but it wont be mee.. :D
 
Status
Not open for further replies.
Top