Chip help please

[It's just a six]

Re: Chip help please

Hey a fellow A&P :tup::tup:

I did not any problems w/my KB street stock injector chip other than it was about 1 1/2 - 2 tenths slower than my ATR pitbull street stock inj,chip.

With the ATR chip I ran a best of 12.29,I now use an old ultimate radar style chip 12.0 & counting down, hopefully.

What's with all of the kb haters? I love mine and it'll walk all over the atr pitbull that I have as well. Yes it wants to knock, but as long as you know how to tune the truck and are careful it makes a ton of power. I have a prompaq in my truck with a stock, atr, and kb and by far the best is the kb. Just my .02 though.

 

[turrrbo6]

Re: Chip help please

What's with all of the kb haters? I love mine and it'll walk all over the atr pitbull that I have as well. Yes it wants to knock, but as long as you know how to tune the truck and are careful it makes a ton of power. I have a prompaq in my truck with a stock, atr, and kb and by far the best is the kb. Just my .02 though.

I am not sure what you consider tuning if you're jumping back and forth to different pre-programed chips. My tuning is done through an ostrich where I can actually change something via laptop and using a wideband. If what you are doing works for you that's great. Back in 1997 I thought my KB chip was working good too! I kept a friendly reminder.

You also usually get a nice hole in your block too.

 

[jollygreen1964]

Re: Chip help please

send it to Hood and reprogam it.

 

[just_a_6]

Re: Chip help please

I have had good luck with the KB chips for a stock truck..