Chip help please

[syclone rider]

Can someone give me the specs on the kb pitbull chip?

 

[REVEREND HARMON]

Re: Chip help please

Wich one do you have?.....the kenny bell or the atr pitbull?...They are 2 different chips..a picture would help out a whole lot.:lol:

 

[cloneman315]

Re: Chip help please

pitbull is a decent chip not the kb

 

[turbodig]

Re: Chip help please

No such thing.

There were about 4-5 KB chips that I'm aware of, and at least 4 different ATR pitbulls.

ATR pitbull for stock injectors was an ok 2 bar chip. Worked well with stock turbo or 20g up to about 18-20 psi. Was fueled a bit heavier than most, which gave a little room for more boost.

 

[syclone rider]

Re: Chip help please

its got a kenne bell sticker on it but ill take a picture tomm and post it.

 

[syclone rider]

Re: Chip help please

http://i926.photobucket.com/albums/ad108/syclonerider/kbchip.jpg Heres the chip

 

[dgoodhue]

Re: Chip help please

Throw it in the trash, it will save you or someone else a motor.

 

[the baPhoon]

Re: Chip help please

Havent seen a kaboom chip in a while.

KILL IT. KILL IT WITH FIRE.

 

[syclone rider]

Re: Chip help please

Throw it in the trash, it will save you or someone else a motor.

Is it that bad damn.

 

[turbodig]

Re: Chip help please

If I remember my numbers right that's a KB street.

In 16 years of doing this, I haven't seen a truck running a KB chip that didn't end up with a dead motor in short order.

 

[syclone rider]

Re: Chip help please

If I remember my numbers right that's a KB street.

In 16 years of doing this, I haven't seen a truck running a KB chip that didn't end up with a dead motor in short order.

I guess ill burn the bitch then i wish i would have asked these questions before i bought it from a guy on here.

 

[powercat6]

Re: Chip help please

Is it that bad damn.

Kenne Bell chips will NOT retard the timing when Knock occurs. This leads to excessive preignition which destroys the engine.

 

[turbodig]

Re: Chip help please

I guess ill burn the bitch then i wish i would have asked these questions before i bought it from a guy on here.

Sell it as a "core". Guys that reburn them can always use another MEMCAL.

 

[It's just a six]

Re: Chip help please

I ran the KB street chip after using the ATR pitbul street chip.
It was slower the the ATR chip & mine (the KB chip) did retard the timing when it was pinging.

 

[syclone rider]

Re: Chip help please

Sell it as a "core". Guys that reburn them can always use another MEMCAL.

whats it worth if you dont mind me asking

 

[gstjohn]

Re: Chip help please

What's with all of the kb haters? I love mine and it'll walk all over the atr pitbull that I have as well. Yes it wants to knock, but as long as you know how to tune the truck and are careful it makes a ton of power. I have a prompaq in my truck with a stock, atr, and kb and by far the best is the kb. Just my .02 though.

 

[powercat6]

Re: Chip help please

Sell it as a "core". Guys that reburn them can always use another MEMCAL.

Dig, can you and the others who burn chips use MEMCALs from other GM applications, such as regular S10 MEMCALs?

 

[turbodig]

Re: Chip help please

Dig, can you and the others who burn chips use MEMCALs from other GM applications, such as regular S10 MEMCALs?

Nope. Gotta be SyTy.

Sunbird turbo isn't the same, either.

 

[powercat6]

Re: Chip help please

Nope. Gotta be SyTy.

Sunbird turbo isn't the same, either.

Damn, there goes my idea of sourcing cores from the junkyard.

 

[turbodig]

Re: Chip help please

whats it worth if you dont mind me asking

30-40.