Search results

Re: Vortec engine swaps, come on in. you MUST also tune your engines fuel cuvre's for alky. not only is it nice to have a progressive alky controller but you have to take fuel out to make it work.

Re: WTB: Stock Memcal I can reburn your atr to stock.

Re: very soft 1-2 shifts has it always been this way or did it just begin getting softer? if it just started it and you have in fact correctly adjusted the TV cable then you could have any 1 of several problems. bad o ring in 1-2 accumulator bad o ring on 2ng gear servo cracked 2-4 band apply...

Re: Anyone know where I can get these gaskets? any parts store will have a gasket kit for these vete, camero TB's from the same yr.

Re: Turbo repair or replacement. I can build your turbo into a 57mm replacement for about 675. total rebuild with warranty. plenty of ppl on here have it and it's been as low ass mid 11's so far. pm me if interested. your type of damage is fairly common these days as the crossover ducting...

Re: 20g actuator questions? my site is no longer. I waited a day late and somebody bought it and won't give it back. I can get you what you need and its way cheaper than 105. pm me for details.

Re: engine harness question he is right, the ty harness has weather pack connectors for the compressor and fan but they can easily be added from a junk yard donor. I've done it several times myself.

Re: Motor Freshening up Quote sounds a little low to me. with new pistons you should be rebalancing the crank and I don't see that on there.

Re: aluminum brake drums drums are better for launching. ebay usually has them in spades.

Re: 20g actuator questions? I would use the right act. the rod's and brackets are different. it can be made to work but for me it's easier to find the right part.

Re: topgear you tube has lots of them.

Re: 20g actuator questions? it will work but it wont bolt up without some mods. they are not the same bolt pattern or flange. but same base boost pressure.

Re: WTB cam I have a few new 412's. pm me if interested.

Re: Wanted 3 gauge pod I gots one.

Re: no more cladding it's not a 5 minute process to remove that stuff. were you on vacation or what?

Re: Transmission the 93 vb has an extra check ball to soften the engagement of Reverse. the 93 also has a different orifice for the feed into the ref input drum. the 93 has a different separator plate. 93 front pump is every so slightly different each year model has it's own stamp in the RR...

Re: Sy 1699 PROSTREET BUILD :bored::bored::bored:

Re: Internal Coolant Leak with Vortec Heads pull the oil pan plug and see if you have any water in the bottom. you don't need to drain the oil just an ounce or so. you shouldn't be having any pressure loss on the cooling system. your loss could be coming from any 1 of a lot of places. heads...

Re: Heads all GM heads that were installed on anything driven off a dealers lot had cast iron heads. 772 should be a vortec head. no real difference in cfm's on any stock vortec head.

Re: 3-4 gear wot shift sleeve .. me. got them in stock. $40 shipped to you. I use the sonnax sleeve, plunger, and spring.