Search results

First off, if someone could stop by my place (Niles, IL) and hook me up with some datamaster readings I would appreciate and pay cash (for gas and time) in hopes that it solves my problem below. Please PM me if you can stop by tomorrow 6/29 or anytime early this week. Here's my problem. One...

The bottom hose on the IC should go to the top of the heat exchanger and the top hose should got to the pump correct????? This is with the hose reroute through the pass fender. Thanks, dcwik

Here was my original post http://www.syty.net/phpBB2/viewtopic.php?t=14973 Well today I went to start her up and I have the same problem as before. The RPM's jump up and down +-400 and she usually dies. If I gas it up she sounds like she choking. Lots and lots of exhaust that smells very...

During the last few days I did some work on my Ty. Today I went to start her up and nothing. The lights in the cab wouldn't even turn on. Here's a quick review of what I did. Day 1: I pulled the battery and simple greened/cleaned the engine. Let it dry for the day (battery still out)...

I am replacing the vac lines in the Ty and noticed the third port on the boost solenoid should have some type of filter because it appears to be a vent port. The filter clip is still on the vac port (bottom port on drivers side solenoid) but the foam is gone. What can I use to replace the...

I have 4 ?'s 1. I get warm air coming out of the foot vent behind the center console when the air temp slider is on cold and hot air when its on hot. I assume a door isn't closing properly and allowing the air in even though the slider is in the "OFF" position. Does anyone know how to get to...

AIM redid the site and the old link I found on the BB for the Lowering Blocks doesn't work. I just want to make sure I order the right part. http://www.truckn-store.com/search.asp?search=blocks The one on the left (with pinion agle) is correct for the syty application correct? Thanks dcwik

What brake options do I have with my stock wheels? 1. Baer front (Sport) and rear (Touring) 2. Willwood from Al 3. Powerstop Brake Rotors. Cross drilled & zinc coated. $110 per pair. Powerstop pads $22.50 per set. Performance Friction carbon metallic pads (1544) $30 per set. Performance...

Hello sytyers, The Ty has been running great....until this morning. I went to start her up and it took forever. She was hesitating, RPM's all over, surging, then eventual death. She would start up and run eventually though (with these conditions except cutting out completely). With this she...