The best conrods for nitrous launching !!!
- Thread starter Syclone22
- Start date
MRKING
New Parts for Old Trucks
Re: The best conrods for nitrous launching !!!
bme aluminum connecting rods if thats what you meant by conrods . You would be spinning your wheels unless a progressive rate nitrous controller is used . The instant hit on launch would also more than likely blow out your forward drum on the trans and maybe even a couple other things .
bme aluminum connecting rods if thats what you meant by conrods . You would be spinning your wheels unless a progressive rate nitrous controller is used . The instant hit on launch would also more than likely blow out your forward drum on the trans and maybe even a couple other things .
midnightbluS10
Banned
Re: The best conrods for nitrous launching !!!
tryin to blow the welds on the intake?
tryin to blow the welds on the intake?
TYTILIDIE
METH HEAD
Re: The best conrods for nitrous launching !!!
Nah, just the washers for the diamond plated floor panel:lol:
Nah, just the washers for the diamond plated floor panel:lol:
TurboTYPHOON
New member
Re: The best conrods for nitrous launching !!!
Thats correct i do have all these options installed so must be
pretty carefull when going full out on the launch i use a boost
trigger to shut off the first stage when boost setting is reached it
is pretty wicked off the line and the 2 and 3 stage nitrous is for
back up against some very fast Nissan GTR,s here they run low 10 seconds
with there AMS Alpha 10 package !!! :tup:
Thats correct i do have all these options installed so must be
pretty carefull when going full out on the launch i use a boost
trigger to shut off the first stage when boost setting is reached it
is pretty wicked off the line and the 2 and 3 stage nitrous is for
back up against some very fast Nissan GTR,s here they run low 10 seconds
with there AMS Alpha 10 package !!! :tup:
aasltmike
Active member
Re: The best conrods for nitrous launching !!!
LMAO! Epic reference to the movie...:tup:
LMAO! Epic reference to the movie...:tup:
Throws
Active member
IpHoOnDyou
New member
Re: The best conrods for nitrous launching !!!
"stand alone fuel management eh?" good way to spend 10 grand"! Lmao that movie is more of a comedy than anything else, does anyone know what the huge braided steel line is under the mitsubishi is?? It has bugged me for years
"stand alone fuel management eh?" good way to spend 10 grand"! Lmao that movie is more of a comedy than anything else, does anyone know what the huge braided steel line is under the mitsubishi is?? It has bugged me for years
Re: The best conrods for nitrous launching !!!
Too funny. No wonder i have been on yelowbullet and turbofurums lately. But yeah, what was up with the diamond plate popin off in that dsm. And a spinout at 120?!? Uh, i have been in a 90's celica with cut springs at 135 (uphill, not my car either :squint
so we should have, uh, flipped or flew into the moon? dunno.
Too funny. No wonder i have been on yelowbullet and turbofurums lately. But yeah, what was up with the diamond plate popin off in that dsm. And a spinout at 120?!? Uh, i have been in a 90's celica with cut springs at 135 (uphill, not my car either :squint
so we should have, uh, flipped or flew into the moon? dunno.