ChevelleDude71
Lo Boost
Ok, so round two for building a Syclone. Its Syclone 829, bought in Castro Valley, CA. It has 87,XXX miles on it, and appears to be completely stock. I put a 3 inch drop block I had lying around (probably from the last sy) while I wait for the Belltech springs to come in the mail.
the paint isn't perfect but it is WAY better then my last one.
Game plan:
not sure if i should use it or sell it....
the paint isn't perfect but it is WAY better then my last one.
Game plan:
- Fix lifter tick (Install 412 cam while I'm there)
- Fix bad hesitation when heavy throttle (may be related to lifter or the ignition, but it feels like a ignition miss)
- Full tuneup (also replace IC pump, metal lines, and flush the cooling systems)
- Lower the back correctly (BellTech, setback plates, blocks, measure for shock length)
- Install new fuel pump
- install 3 inch exhaust with Borla XR1 muffler
- hopefully if will be running good at that point and I'll get to start looking into what chip and tuning hardware, which the truck came with this....
not sure if i should use it or sell it....
