Foot Performance
Donating Member
I have a bunch of small block Chevy stuff laying around that I need to get rid of.
Canfield cylinder heads they were bolted on a new built but engine was never even cranked. they are a 72cc combustion chamber. They say 215 on them but I was sure they were a 220 intake runner. they are assembled less studs and guide plates. springs are set up for roller camshaft up to .600 lift ------1000.00
SRP pistons dome .040 for a standard 350 stroke comes with rings pretty sure the are Mahle rings. SRP part number 140675------ 575.00
Set cast aluminum valve covers no holes drilled.------60.00
Couple of front covers one has support brace welded in for cam button the other is stock both new.------40.00/20.00
Standard stud spacing cylinder head stud girdles with 7/16 nuts. comp cams 4009.------165.00
Jomar performance stud girdles 1101 no nuts. Not sure what they fit (some variation of small block Chevy) but you can call Jomar and they are very knowledgeable------45.00
Single plain intake similar to super victor. I think it is professional products hurricane unpolished------175.00
Edlebrock performer rpm non air gap this is used------85.00
GM factory heads 882 they have screw in studs and light porting (i am sure not professional) they are assembled and came off a running and driving car 5-8k on the heads since they were gone through but i dont know what was done------Make offer
I have pictures of the most the stuff and can get pictures of what ever so let me know I am open to offers
Canfield cylinder heads they were bolted on a new built but engine was never even cranked. they are a 72cc combustion chamber. They say 215 on them but I was sure they were a 220 intake runner. they are assembled less studs and guide plates. springs are set up for roller camshaft up to .600 lift ------1000.00
SRP pistons dome .040 for a standard 350 stroke comes with rings pretty sure the are Mahle rings. SRP part number 140675------ 575.00
Set cast aluminum valve covers no holes drilled.------60.00
Couple of front covers one has support brace welded in for cam button the other is stock both new.------40.00/20.00
Standard stud spacing cylinder head stud girdles with 7/16 nuts. comp cams 4009.------165.00
Jomar performance stud girdles 1101 no nuts. Not sure what they fit (some variation of small block Chevy) but you can call Jomar and they are very knowledgeable------45.00
Single plain intake similar to super victor. I think it is professional products hurricane unpolished------175.00
Edlebrock performer rpm non air gap this is used------85.00
GM factory heads 882 they have screw in studs and light porting (i am sure not professional) they are assembled and came off a running and driving car 5-8k on the heads since they were gone through but i dont know what was done------Make offer
I have pictures of the most the stuff and can get pictures of what ever so let me know I am open to offers
Last edited:
