Ran the 1/8 with the new motor today

[Turbo6]

Made 3 passes at 20 psi today to dial in the launch and tune a little. I cant run over 20 psi because I still have the 255 walbro and it probably will run out of ass and dont wanna pop this new motor. With 25 psi 6.50's should be a breeze. Here is the 3rd pass slip:

60' 1.47
330' 4.35
1/8 6.83
MPH 100.25

Cant wait to give it some boost!

 

[GM TURBO]

Re: Ran the 1/8 with the new motor today

Very nice. Should make for an interesting '05.

 

[MRKING]

Re: Ran the 1/8 with the new motor today

Nice times . That would have been at least another 10 sec quarter run . Your deffinately doing all the right things .

 

[SY2932]

Re: Ran the 1/8 with the new motor today

AWESOME PASS :tup: !

 

[Jimmy]

Re: Ran the 1/8 with the new motor today

Go Phil go!

 

[Ty 1450]

Re: Ran the 1/8 with the new motor today

wow 1.47 60'!!!

 

[DOMN8R]

Re: Ran the 1/8 with the new motor today

I like how your first 60' with the new motor is exactly the same as your best 60' with the stock one. I was very impressed with what you did with the old motor, looking forward to seeing what you can do with the new one.

 

[Stangbeater]

Re: Ran the 1/8 with the new motor today

Again Phil is a tuning master. Nice run.

 

[ed hess]

Re: Ran the 1/8 with the new motor today

phil

you should see 9's on that.

wtg

ed

 

[Turbo6]

Re: Ran the 1/8 with the new motor today

wow 1.47 60'!!!

Yeah but I tried to leave the line the same as the old motor the first pass and it was spinning like crazy with a 1.56. Had to back off the launch to 2800 rpm with 6 psi and throw some extra fuel in at 3200 and 3600 to soften the hit of the turbo. I think it might have some more 60' in it.

 

[Turbo6]

Re: Ran the 1/8 with the new motor today

phil

you should see 9's on that.

wtg

ed

WOW I dont think it will but who knows. It only about 10.70's right now. My 75#ers are at 85% already too Ed so I'll have to address that situation with the higher boost.

 

[ed hess]

Re: Ran the 1/8 with the new motor today

phil

did you use a stock block or a bt block for this build.
hoping you used a bt so you dont find the power limits of a stk block like did.

if its a stock block is it filled aand a mid plate?

ed

 

[Turbo6]

Re: Ran the 1/8 with the new motor today

phil

did you use a stock block or a bt block for this build.
hoping you used a bt so you dont find the power limits of a stk block like did.

if its a stock block is it filled aand a mid plate?

ed

Its a stock block and I dont know what mods if any were done to the block except the 4 bolt mains. I would have to ask E and Turbotime they did the motor....if this one pukes I'll put a bt in it.

 

[Tydriver]

Re: Ran the 1/8 with the new motor today

Sweeet times Phillip... Need to get you on a prepped 1/4mi track then HOLD ON !!

 

[E-Rue]

Re: Ran the 1/8 with the new motor today

no block fill was used.
although these pics are of my motor, phillips is identical.......

http://gallery.turbotime.us/gallery/syclone

post about the build (very long)

http://www.syty.net/forums/showthread.php?t=21568

e

 

[hamrhead]

Re: Ran the 1/8 with the new motor today

Damn that 60' is insane!! Nice Job - Can't wait to see how quick this motor takes you!

 

[tyRod]

Re: Ran the 1/8 with the new motor today

Phillip,
Great run!! Let me know the next time you go to the Farm. Blake and I will be out there soon.

Rod

 

[Turbo6]

Re: Ran the 1/8 with the new motor today

I wish you had been there Rod we had a good time. E Rue, SycloneWillie and Scott were there. I told E a few days before that if I ran 100mph+ on 20 psi I would hug him so you know what I had to do Was fun outrunning full drag cars. Plans are to do the fuel system, change the governor and crank the boost and make a trip to Farmington to test before the end of the month so I'll let you know the date. If all goes as planned I'll run at Rockingham May 1st.

 

[Syclone#1992]

Re: Ran the 1/8 with the new motor today

Quick question as to why the motor upgrade? Did the stocker give way, or did you just want a change of pace?

 

[Turbo6]

Re: Ran the 1/8 with the new motor today

I started this project almost a year ago knowing it would take a while and I was really pushing the stock motor. The last pass that stocker made was the 10.93 and it had 155-160 compression when I took it out. I REALLY hated to take it out. That thing made tons of 25 psi passes and like 6 passes with a 40 shot of nitrous.