Project: Typhoon 0437
- Thread starter pearl91chevy
- Start date
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
he checked out my logs from datamaster, and made a chip to improve how its currently running, then shipped it to me..and im sending him the other chip back
he checked out my logs from datamaster, and made a chip to improve how its currently running, then shipped it to me..and im sending him the other chip back
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
first off big big thanks to sportmachines on this!!!! i dont have any pictures after i got it back from them, but i do have the finished product.. i didnt ask him to paint it, i did when i got it back but its pretty clear how good of a job he did, not to mention they rebraced the entire backside again like it was from factory..
before:
after i got it back and painted:
Soooo nice having it back on the truck
Also heres the convertor which i was told could be a 2800 stall
and another with the daily
Also i installed the front end limiters which made a huge difference in launches, more then i expected honestly, well worth the 15bucks.. Put new door pins/bushings in on the drivers door so it doesnt look like its got down syndrone and Also got the new cv shaft installed since my old ones boot exploded, and been working on the boost... Off to the syty meet now!
first off big big thanks to sportmachines on this!!!! i dont have any pictures after i got it back from them, but i do have the finished product.. i didnt ask him to paint it, i did when i got it back but its pretty clear how good of a job he did, not to mention they rebraced the entire backside again like it was from factory..
before:
after i got it back and painted:
Soooo nice having it back on the truck
Also heres the convertor which i was told could be a 2800 stall
and another with the daily
Also i installed the front end limiters which made a huge difference in launches, more then i expected honestly, well worth the 15bucks.. Put new door pins/bushings in on the drivers door so it doesnt look like its got down syndrone and Also got the new cv shaft installed since my old ones boot exploded, and been working on the boost... Off to the syty meet now!
nello
Active member
Re: Project: Typhoon 0437
Just went through your entire thread bro...real nice, lots of hard work. I'm working on my own truck, searching the forum, and keep getting side tracked by threads like this! :banghead: I don't think I've ever seen a Ty so squished down before, or with as large wheels. Looks B.A!
I was going effing apoplectic, jumping on my keyboard over chrome on the tail lights, thanks for fixing that
About the coil overs: For me,coil overs are a MUST. If folks were to ask, what's it like, how's the ride different? I'm making this up but, I'd say my suspension, :turbo: on the SYTY boost meter score chart, scaled 0-30, is like going from 14.6lbs to 22lbs. Putting on the stock arms is a PITA, but still pretty basic. If I was going to do it again tho, had the $$ ready, I'd have sprung for the sportmachines A-arms. Thats just how I would want my setup now having done the same as pearl and others. However, with coil overs on stock arms, no complaints here whatsoever.
Just went through your entire thread bro...real nice, lots of hard work. I'm working on my own truck, searching the forum, and keep getting side tracked by threads like this! :banghead: I don't think I've ever seen a Ty so squished down before, or with as large wheels. Looks B.A!
I was going effing apoplectic, jumping on my keyboard over chrome on the tail lights, thanks for fixing that
About the coil overs: For me,coil overs are a MUST. If folks were to ask, what's it like, how's the ride different? I'm making this up but, I'd say my suspension, :turbo: on the SYTY boost meter score chart, scaled 0-30, is like going from 14.6lbs to 22lbs. Putting on the stock arms is a PITA, but still pretty basic. If I was going to do it again tho, had the $$ ready, I'd have sprung for the sportmachines A-arms. Thats just how I would want my setup now having done the same as pearl and others. However, with coil overs on stock arms, no complaints here whatsoever.
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
i knew my meet up in chicago went to smooth, having no problems with the ty...
Comw home today, even thought about taking it for a spin and noticed a dark puddle on my passenger rear wheel, i though it was a broken brake line... Boy was a i wrong, started tearing into it and its def a gear fluid smell.. So looks like ill be replacing seal or bearing or whatever is in there... Any advice on this? this is something new for me.. Im guess i will have to pop off the diff cover, pull the c-clip to pull axle out, and then use some kind of puller to get the bearing out?? ive never done anything beyond taking a diff. cover off so any help is appriciated
i knew my meet up in chicago went to smooth, having no problems with the ty...
Comw home today, even thought about taking it for a spin and noticed a dark puddle on my passenger rear wheel, i though it was a broken brake line... Boy was a i wrong, started tearing into it and its def a gear fluid smell.. So looks like ill be replacing seal or bearing or whatever is in there... Any advice on this? this is something new for me.. Im guess i will have to pop off the diff cover, pull the c-clip to pull axle out, and then use some kind of puller to get the bearing out?? ive never done anything beyond taking a diff. cover off so any help is appriciated
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
finally got some parts in very happy when i got home.. Rest parts should be here by weekend!!!
I like before and after pictures, i would like to do some new paint in the engine bay, just comes down to time
before:
Middle:
Now :
finally got some parts in
very happy when i got home.. Rest parts should be here by weekend!!!I like before and after pictures, i would like to do some new paint in the engine bay, just comes down to time
before:
Middle:
Now
:
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
got my hood off, took the insulation off expecting i would need to paint it... just needed a good clean up!
Clean on right side, dirty on left
full clean
And installed back on the typhoon, i think it looks sooo much better
did a quick paint on the wiper arms since they were faded and peeling
Next up the fender wells
i bought a paint like por-15 threw farm and fleet, the can said it comes out black.. i dont think so..
Back again with the black paint like it was supposed to be
and the turbo installed along with the downpipe that ups made me wait all weekend on!! i still need to button a few things up, and play with the tune.. but damnnnn it sounds pretty with that turbo spoolin
This video i only did half throttle
got my hood off, took the insulation off expecting i would need to paint it... just needed a good clean up!
Clean on right side, dirty on left
full clean
And installed back on the typhoon, i think it looks sooo much better
did a quick paint on the wiper arms since they were faded and peeling
Next up the fender wells
i bought a paint like por-15 threw farm and fleet, the can said it comes out black.. i dont think so..
Back again with the black paint like it was supposed to be
and the turbo installed along with the downpipe that ups made me wait all weekend on!! i still need to button a few things up, and play with the tune.. but damnnnn it sounds pretty with that turbo spoolin
This video i only did half throttle
Sean Krupa
Moderator
Re: Project: Typhoon 0437
Sounds sweet Jesse! Keep up the good work. See you soon :tup:
Sounds sweet Jesse! Keep up the good work. See you soon :tup:
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
Thanks Sean! I might make my way to your place this weekend so I can get a filter on this
Thanks Sean! I might make my way to your place this weekend so I can get a filter on this
blacktyaffair
Donating Member
Re: Project: Typhoon 0437
That DP looks like poo. Keep up the good work, Mr. Carpenter. :tup:
That DP looks like poo.
Keep up the good work, Mr. Carpenter. :tup:
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
Thanks for taking so long to ship it :rotf:
That DP looks like poo.
Thanks for taking so long to ship it :rotf:
pearl91chevy
Donating Member
killa66cam
RIDIN DIRTY
Re: Project: Typhoon 0437
Looking good! What kind of beer is that 312?
Cam
Looking good! What kind of beer is that 312?
Cam
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
The only 312s they sell here lol Don't know off hand exact kinda of flavor, it's got a very good wheat taste though
The only 312s they sell here lol Don't know off hand exact kinda of flavor, it's got a very good wheat taste though
killa66cam
RIDIN DIRTY
Re: Project: Typhoon 0437
Gotcha. Where are you located, Illinoise? I haven't seen that one around anywhere before. I live in South Carolina. I buy every new beer that I can find, anywhere that I can find them.
Cam
Gotcha. Where are you located, Illinoise? I haven't seen that one around anywhere before. I live in South Carolina. I buy every new beer that I can find, anywhere that I can find them.
Cam
pearl91chevy
Donating Member
Re: Project: Typhoon 0437
Rockford, I'm bout 10 min from the wi border.. They sell it almost everwhere here, 312, shock top, and Samuel really common
Rockford, I'm bout 10 min from the wi border.. They sell it almost everwhere here, 312, shock top, and Samuel really common