Project: Typhoon 0437

randy merritt

Donating Member
Re: Project: Typhoon 0437

Do you have Datamaster or Tuner Pro with needed hardware that you could post a log? That would be a great help to diagnose your problem.
 

randy merritt

Donating Member
Re: Project: Typhoon 0437

i need the hardware :( i wish i can find one local!

If you are going to be in the sy/ty game and get serious about it you need this and a laptop:

http://www.moates.net/aldu1-and-cabl1-xtremealdl-and-newcabl1-combo.html

Well worth the investment. If you have any plans at all on tuning later, I would go with Tuner Pro (it is free), and it does datalogging. Datamaster is a good scan tool, but does not offer tuning capabilities of Tuner Pro. However, if you are new to the scan tool game, Datamaster is much easier for beginners. All you need is Datamaster, a laptop, and the cable above.
 

choffert1

New member
Re: Project: Typhoon 0437

the ty looks good lowered big difference. it is amazing what a drop can do for appearance
 

Quickstop [UK]

Combating adversyty.
Re: Project: Typhoon 0437

Looks awesome! Rip off the Typhoon logo from the windshield though :tup:

IS the offset on your rear wheels right btw? Looks like they're inboard somewhat.

Great job on resurrecting it!
 
Last edited:

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

i have the laptop just need that cable lol. Anyone got one for sale?? even better anyone within the chicago area i can just pick up and wont have to wait on shipping??
 

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

Looks awesome! Rip off the Typhoon logo from the windshield though :tup:

IS the offset on your rear wheels right btw? Looks like they're inboard somewhat.

Great job on resurrecting it!


the offset is off right now, dont have the spacers in back yet

and thanks :D:D
 

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

well little update on the typhoon.. again working on her allllllllllllllll day, bought a new filter, pcv valve and re-gapped the plugs.. Also checked all the fluids again and seen that the trans fluid was low!!!! so off i went, Bought more fluid and filled her up at running temp and back out i went for a test drive.. Must say it runs ALOT better.. alot smoother and doesnt feel so sluggish, i do feel a slight cutout right before shifts though.. Another thing i can let it sit and idle for a few min after i drive it, turn the truck off and then start truck back up a few min later and get a puff of black out the tailpipe on start.. i thinking i might be a little rich.................



Anyways heres the work from today :)

DSC02632.jpg


DSC02633.jpg


DSC02634.jpg


DSC02635.jpg


DSC02641.jpg


DSC02645.jpg






night night !

DSC02646.jpg
 

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

actually drove her on the street for first time today, ran good... lots of looks. After work i headed to orileys and picked up a fuel pressure tester and what should have been a 5 min trip turned into a 20min trip since all the guys had to come out and check it out.
 

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

well uh... found my problem..
DSC02647.jpg


That kinda explains why im having so many problems and im blowing black out the exhaust^^^
all better :)
DSC02649.jpg


Runs sooooooooooooo smooth now, no hesitation, constant pull.. gets to 80 quick now!!
 

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

thank you :)

picked up a set of stock tails tonight and also got a 160tstat i need to get installed.. sucks the thermostat gauge wont go above 1/4 though
 

neildemo

Administrator
Re: Project: Typhoon 0437

Looking Good! Glad she went to a good home.Glad your happy with her Jesse. She was a good truck just needed some loving. And shes getting Plenty now :)
 

pearl91chevy

Donating Member
Re: Project: Typhoon 0437

thanks neil.. i knew she needed the love and i got all the love to give to her lol, but its def making my g/f jealous..
 
Top