Need Pinout for firewall connector to fusebox(pic)

[mattw]

Can anyone get me a pinout of this connector:

Its the one that plugs in below our brake booster and I believe it goes to the back of the fusebox. I'm pretty sure that it contains wires for: lights, abs, power for engine wiring harness, etc but I need a pinout that shows exactly what each pin is for.


Thanks,
-Matt

 

[dgoodhue]

Re: Need Pinout for firewall connector to fusebox(pic)

Its in the SyTy CD-ROM, I remember debugging some connection in my 93 Ty I had.

 

[mattw]

Re: Need Pinout for firewall connector to fusebox(pic)

Its in the SyTy CD-ROM, I remember debugging some connection in my 93 Ty I had.

I could have sworn that I looked there.. I'll look again.


Thanks,
-Matt

 

[Flyin Ryan]

Re: Need Pinout for firewall connector to fusebox(pic)

Matt,

If you do happen to find it.. could you post it up?

 

[mattw]

Re: Need Pinout for firewall connector to fusebox(pic)

Yep, I found it.. Its part of a 2mb PDF.. Mine was labeled Wiring Diagram_749.pdf. Its 26 pages long and is the most detailed 749 wiring diagram I have seen.


-Matt

 

[mattw]

Re: Need Pinout for firewall connector to fusebox(pic)

Well, I made this based off of the PDF and what I could trace out using the molested harness that I have.

If anyone knows what K 4-6 do please let me know. Page 44 of the PDF says that they are for rear lamps and the fuel pump but I'm not so sure that I believe that. They have been cut off on the harness that I have so I was not able to trace them.

Also, if anyone knows where I can find this pinout for a 93 4 door 4x4 chevy blazer please let me know. If I were to guess I would say that most of the pins are the same but I need to know for sure.

EDIT: I figured out what K 4-6 do and updated the diagram.

Thanks,
-Matt

 

[dogboy]

Re: Need Pinout for firewall connector to fusebox(pic)

hi any idear what caused this?
ive been getting a burnt wiring smell on start up for a few days now but then goes away but
last night it hung around and at one point the head lights flickered for about 30 secs
untill i switched em off then back on is this what happened to your's?

 

[mattw]

Re: Need Pinout for firewall connector to fusebox(pic)

hi any idear what caused this?
ive been getting a burnt wiring smell on start up for a few days now but then goes away but
last night it hung around and at one point the head lights flickered for about 30 secs
untill i switched em off then back on is this what happened to your's?

I'm building a clone thats why I was after this info.. Gonna be plugging a sy/ty harness into this connector on a 93 Blazer so I needed to verify that the pinout was the same.

As far as your problem goes I would bet its the headlight switch. I bet it stops working altogether soon.


Good luck,
-Matt

 

[dogboy]

Re: Need Pinout for firewall connector to fusebox(pic)

Thanks for the info',so thats not burnt out then?
you don't have a spare switch do you?

 

[sparkwire]

Re: Need Pinout for firewall connector to fusebox(pic)

I think the pinouts are different on the s10, I had a ls1 harness,made by Jarred, for my ty and he had a hard time with it, said they were different??

 

[mattw]

Re: Need Pinout for firewall connector to fusebox(pic)

I think the pinouts are different on the s10, I had a ls1 harness,made by Jarred, for my ty and he had a hard time with it, said they were different??

Who is Jarred? Maybe he could provide me with the pinout for the s10 harness..??


Thanks,
-Matt

 

[sparkwire]

Re: Need Pinout for firewall connector to fusebox(pic)

he owns Current Performance, his specialty is the s10 swap harness. http://currentperformance.com/