LS1 Ebrake brackets
- Thread starter jjorgensen52
- Start date
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
thats 8 sets I've got.... picking up the steel tomorrow morning, should have most of the brackets done by weds
Re: LS1 Ebrake Brackets
thats 8 sets I've got.... picking up the steel tomorrow morning, should have most of the brackets done by weds
12secondSY
Syty Killer :(
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
You should put together some cables and sell it as a kit.
Re: LS1 Ebrake Brackets
You should put together some cables and sell it as a kit.
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
I'd have to have the cables made, but I may look into it12secondSY said:
QUICK STORM
B.A.M.F. BMW Tech
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
x2:tup:
Re: LS1 Ebrake Brackets
SyTyJedi said:
x2:tup:
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
I'll have to see what I can do :lol:
Re: LS1 Ebrake Brackets
I'll have to see what I can do :lol:
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
no word on cables yet, but I've done one rough bracket on the new ABS-friendly design, it all fits and everything looks good to run these off tomorrow :tup:
Re: LS1 Ebrake Brackets
no word on cables yet, but I've done one rough bracket on the new ABS-friendly design, it all fits and everything looks good to run these off tomorrow :tup:
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
Alright, Finished brackets are here!
Re: LS1 Ebrake Brackets
Alright, Finished brackets are here!
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
Also, forgot to mention this in PM's
The brackets all fit my typhoon, but the bolt holes may need to be massaged slightly to fit your truck... I only have so much control over that :lol:
For syclones, the abs sensors should clear, but it may need to be notched similar to the backing plate mount flange
Re: LS1 Ebrake Brackets
Also, forgot to mention this in PM's
The brackets all fit my typhoon, but the bolt holes may need to be massaged slightly to fit your truck... I only have so much control over that :lol:
For syclones, the abs sensors should clear, but it may need to be notched similar to the backing plate mount flange
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
I changed the design so they will clear the ABS sensors on the syclones, which for the LS1 brakes are mounted to the disc backing plate just ahead of the axle.
The originals that are on my Typhoon will not allow for that sensor, which does not matter on a Ty because the abs pickup is on the transmission.
Re: LS1 Ebrake Brackets
I changed the design so they will clear the ABS sensors on the syclones, which for the LS1 brakes are mounted to the disc backing plate just ahead of the axle.
The originals that are on my Typhoon will not allow for that sensor, which does not matter on a Ty because the abs pickup is on the transmission.
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
I'll sell you the set off my Ty if you want that first design... it'll delay them a bit, cause I'll need to pull them off. Probably won't be able to do that until next weekend. Otherwise, same price.
Re: LS1 Ebrake Brackets
I'll sell you the set off my Ty if you want that first design... it'll delay them a bit, cause I'll need to pull them off. Probably won't be able to do that until next weekend. Otherwise, same price.
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
Not anytime soon. They were actually mild steel, just well polished. They've since been painted with the same stuff as the new brackets.
Along with being non-abs compatible, those other ones are much more difficult to make. I also did not like the lack of lateral support between the mounting flange and the cable mount. The second version is meant to be improved, and I am more than happy to use them myself. But, I only have one set of first design (they are on my Ty). So, maty111 gets first dibs on those.
Re: LS1 Ebrake Brackets
Not anytime soon. They were actually mild steel, just well polished. They've since been painted with the same stuff as the new brackets.
Along with being non-abs compatible, those other ones are much more difficult to make. I also did not like the lack of lateral support between the mounting flange and the cable mount. The second version is meant to be improved, and I am more than happy to use them myself. But, I only have one set of first design (they are on my Ty). So, maty111 gets first dibs on those.
jjorgensen52
NHSTE - I'm the only one!
Re: LS1 Ebrake Brackets
Re: LS1 Ebrake Brackets
Looked into cables a bit. The camaro ends seem to be a fairly oddball piece, I can't find any cable-makers who have that end
However, If you guys who want cables don't object to putting a pin through the caliper lever, I can offer cables. Haven't got a price yet, but If pins are a go I can get one
Re: LS1 Ebrake Brackets
Looked into cables a bit. The camaro ends seem to be a fairly oddball piece, I can't find any cable-makers who have that end
However, If you guys who want cables don't object to putting a pin through the caliper lever, I can offer cables. Haven't got a price yet, but If pins are a go I can get one