L35 Heads Wanted
- Thread starter neildemo
- Start date
warmpancakes
New member
Re: L35 Heads Wanted
13pelle got his set from parts galore about 100 we pulled them
13pelle got his set from parts galore about 100 we pulled them
13Pelle
Active member
BMFB
Not to scale
Re: L35 Heads Wanted
I got a set from my local yard (freemans in davison) for the cost of bringing back the other heads. I got them milled, valves redone, and new guides put in. I think that cost about 150. I had to also add new springs to accommodate the higher lift cam, but if your running a stock cam you should be good for springs.
I got a set from my local yard (freemans in davison) for the cost of bringing back the other heads. I got them milled, valves redone, and new guides put in. I think that cost about 150. I had to also add new springs to accommodate the higher lift cam, but if your running a stock cam you should be good for springs.
Sportmachines
Active member
Re: L35 Heads Wanted
Neil, where did you go? We have a couple sets, fully worked. LMK about them and the other stuff we've been going back and forth on.
Neil, where did you go? We have a couple sets, fully worked. LMK about them and the other stuff we've been going back and forth on.