grimprime221
Member
Putting new heater core and hoses in sy. Have ac out. Any tricks for core swap done before in s-10 didn't know if ny tricks that would make this easier this time. Where is the best place to get the hoses? Thanks for the help.
heater core and hoses
- Thread starter grimprime221
- Start date
asmo
Sy #2918
Re: heater core and hoses
look on youtube theres a video, the guys an idiot but its pretty staight forward.
When I did mine I didnt remove the dash just loosened the bolts and pulled the pass side out a couple inches,then was able to get it out from under there.
take your time its not to hard.
look on youtube theres a video, the guys an idiot but its pretty staight forward.
When I did mine I didnt remove the dash just loosened the bolts and pulled the pass side out a couple inches,then was able to get it out from under there.
take your time its not to hard.
randy merritt
Donating Member
Re: heater core and hoses
There is a very good step by step tutorial on here somewhere. It includes lots of pictures and was very helpful when I swapped mine. You will have to search to find it.
There is a very good step by step tutorial on here somewhere. It includes lots of pictures and was very helpful when I swapped mine. You will have to search to find it.
randy merritt
Donating Member
grimprime221
Member
Re: heater core and hoses
Thanks for the tips. and resourses. Going to tackle it in the next few days. only concern is the ECm its been relocated to glove box and wires are kinda tight and messing that up moving the dash out. those detailed posts really refreshed the memories of the fun of the job.
Thanks for the tips. and resourses. Going to tackle it in the next few days. only concern is the ECm its been relocated to glove box and wires are kinda tight and messing that up moving the dash out. those detailed posts really refreshed the memories of the fun of the job.