first time at the track video 12.3 syclone

[bezerk]

http://www.youtube.com/watch?v=4HIw7rX9Hd4

is was really crowdy. first run was 12.2 video shows a 12.3. big problem was traction and heatsoak because of the stupid long waiting. about 100 cars in line, moving slowly. boost was at 15 psi on pump gas, next time i''ll bring an alky kit.
enjoy

 

[phoonTy]

Re: first time at the track video 12.3 syclone

nicely done! Too bad that fart can was so loud. almost couldn't hear your truck. :tup:

 

[13Pelle]

Re: first time at the track video 12.3 syclone

Nice video.........good quality, risp and clear. Your truck kicks ass...damn good looking. Goddamn dutchies!!

 

[bezerk]

Re: first time at the track video 12.3 syclone

thanks man, bundie made the video. thanks bundie!

 

[BoostedSUV]

Re: first time at the track video 12.3 syclone

Care to share the "build sheet'. Just curious what you have done to the truck. I'm hoping to be in that ballbark with my ty on straight pump gas and 18psi

 

[NecroWolf]

Re: first time at the track video 12.3 syclone

you could probably put fans on the rad for the intercooler and a manual override switch that will run them and the intercooler pump to help beat heat soak if you have time to shut down while you're waiting to stage.

 

[REVEREND HARMON]

Re: first time at the track video 12.3 syclone

nice run :tup:

 

[vinnieTy]

Re: first time at the track video 12.3 syclone

Great run!!! Question...why did your reverse lights come on a few times. Are you putting it into park to build brake pressure??? Why not neutral?

 

[bundie]

Re: first time at the track video 12.3 syclone

first.
nice to meet you irl rene!

video came out really good!!

and your truck is better in real than on photos!
and you also run a 12.2 but I forgot the record button lol but we have the timeslips :tup:

 

[bezerk]

Re: first time at the track video 12.3 syclone

build sheet at this moment, ported vortecs. pte65's injectors pt67dbb turbo 2800 stall tc. a2a.
this was a 15psi run, we're in the middle of tuning it. alky kit should be here really soon so i can turn up the boost, this run was made on pump gas.
as for the reverse lights. i was staging to deep so i had to move back a BIT.

as for the heatsoak, i'm running an a2a. and the waiting line was really long. peddling for about 45 min doesn't do any good, i have fans on the a2a, but the heat is already under the hood. i hope the alky will cure some of that heat.

thanks for the great words, and nice to meet you bundie!

 

[bundie]

Re: first time at the track video 12.3 syclone

found this pic man.