Chrome C6 ZO6 wheels on Typhoon

[kwadep21]

Would someone be willing to post my pictures of the new chrome C6 ZO6 wheels on my white/white Typhoon?

See Bottom of Page 2 of this thread for the recent pictures that were taken after the 2" drop and the RPM exhaust.

 

[H-TOWN-TYPHOON]

Re: Chrome C6 ZO6 wheels on Typhoon (somone host pics?)

Re: Chrome C6 ZO6 wheels on Typhoon (somone host pics?)

 

[kwadep21]

Re: Chrome C6 ZO6 wheels on Typhoon (somone host pics?)

Re: Chrome C6 ZO6 wheels on Typhoon (somone host pics?)

I truly like the C6 ZO6 wheel. I am thinking about in time having these wheels done in Black Chrome by Atlas plating here in Houston.

Here are the specs:

17" X 9.5" all 4 corners
1" spacers in rear (keeps the edge of the wheels exactly true with the top of the cladding)
245/45/17 tires (would go wider for a better fit on the 9.5" wheels if I had to do it again)
54mm backspacing
No mods to wheel studs
I ground down the front hub bolt before receiving the wheels, I did not need to.

 

[CAMSTY]

Re: Chrome C6 ZO6 wheels on Typhoon

Looks awesome!!! but damn that bitch needs to be lower badly!! Belltech springs are less than $200 and a few turn on the torsion bars are even less

 

[chelo]

Re: Chrome C6 ZO6 wheels on Typhoon

Do you loosen or tighten the bolts in the keys to drop the front?

 

[kwadep21]

Re: Chrome C6 ZO6 wheels on Typhoon

I know.... I know.... I know..... I know...... It looks goofy!!! I have the springs on the way and a 1" block just in case. I wanted to make sure I did things in the right order so I spent a good amount of money to fix plugs, wires, rotor, cap, coil, silicone vacuum lines, boost gauge, fuel pressure gauge, exhaust (RPM... shipping this week), trans cooler, etc.

 

[AUSyTyIN]

Re: Chrome C6 ZO6 wheels on Typhoon

Why would anyone put Vette wheels on that moster truck? :rotf:

Let me guess, you still have the load leveler suspension still hooked up?

 

[ZMann]

Re: Chrome C6 ZO6 wheels on Typhoon

loosen to lower.

 

[chelo]

Re: Chrome C6 ZO6 wheels on Typhoon

thanks zmann

 

[Blown]

Re: Chrome C6 ZO6 wheels on Typhoon (somone host pics?)

Re: Chrome C6 ZO6 wheels on Typhoon (somone host pics?)

:tup:

]

 

[QUICK STORM]

Re: Chrome C6 ZO6 wheels on Typhoon

looks sweet, i wonder what they would look like in black?

 

[kwadep21]

Re: Chrome C6 ZO6 wheels on Typhoon

I was unable to find these at the time in Gunmetal gray... I am thinking about having the wheels re-coated in the Black Chrome. Not anytime soon but if/when I do I will post pics.

 

[Wallace]

Re: Chrome C6 ZO6 wheels on Typhoon

That is one sharp ride! and very clean.

 

[kwadep21]

Re: Chrome C6 ZO6 wheels on Typhoon

Thanks Wallace

 

[ZavzTy547]

Re: Chrome C6 ZO6 wheels on Typhoon

Thanks Wallace

Nice wheels compliment a sweet ride!

 

[tnsyty]

Re: Chrome C6 ZO6 wheels on Typhoon

corvettegarage has these in hyperblack, 18x9.5 and 18x11 in the correct offsets. I had them on my Ty for a while.

 

[92 Ty 1173]

Re: Chrome C6 ZO6 wheels on Typhoon

Hey Cam like the new avitar. I like your C-6 wheels better than the Z-06 wheels.

 

[93TyGuy]

Re: Chrome C6 ZO6 wheels on Typhoon

I know I am digging up a kindof old post but those wheels look sick!

 

[libertysyclone]

Re: Chrome C6 ZO6 wheels on Typhoon

Crappy 5min chop

I dont like these wheels, the just dont look good IMO. They are too open/busy.

 

[Try Me]

Re: Chrome C6 ZO6 wheels on Typhoon

Crappy 5min chop

I dont like these wheels, the just dont look good IMO. They are too open/busy.

at least the truck finally got lowered :rotf:

i like the chrome on the white white, the gunmetal sucks. nice truck though either way