AN Fuel Hose Rounting

[tunerpike]

Sup Fellas..

I have purchased all new AN PTFE Line and Fittings.. I'm running RPMs double pumper setup so I went with -8 Feed and -6 Return..

I was wanting to know how others have ran their line.. Did you run them the same way as stock and fished them up through the hole in the frame by the fire wall? or.. How did you secure them?

Also, did yall keep the evap hose or do away with it?

At them moment I am planning to run the stock fuel filter but my change to an aftermarket at some point..

I appreciate any feedback..

 

[Quickstop [UK]]

Re: AN Fuel Hose Rounting

I didn't run AN hose but did replace my stock lines due to having the 80E. I ended up using -8 and -6 equivalent rubber hose - it's really really durable stuff with PTFE braid. I wanted less metal to rub on the trans tunnel and possibly make a noise if it rattled.

I basically stuffed it in. There's not many places to route it! I don't recall the hole by the firewall.

I kept the canister.

 

[tunerpike]

Re: AN Fuel Hose Rounting

Okay.. I see what your saying, the fuel lines originally went over and bolted to the transfer case and just kinda laid on the transmission for there.

My truck has been in pieces for a couple of years, so I don't fully remember where everything goes... I recently got all the drivetrain and suspension back under it and put the cab own this past weekend.

 

[Quickstop [UK]]

Re: AN Fuel Hose Rounting

Yours and everyone else's!