1/4 mile results video uploaded

Smkur50

Smkur50

SYTY Fleet owner
Re: 1/4 mile results video uploaded

My best 60 foot times with nittos were 18psi, MT drag radials 12psi on a LS fbody 6 speed. Over 20psi is way to high
 
SYCLONE#1531

SYCLONE#1531

'MOFOFAST
Re: 1/4 mile results video uploaded

I think I would turn the boost up to around 25/26 which was totally safe on my stock LB truck. Mine consistantly ran 11.40s at 117mph with 1.8 60fts on average
 
Don W.

Don W.

Stab it and steer it
Re: 1/4 mile results video uploaded

SYCLONE#1531 said:
I think I would turn the boost up to around 25/26 which was totally safe on my stock LB truck. Mine consistantly ran 11.40s at 117mph with 1.8 60fts on average
Click to expand...

11.40 @ 117 with 1.8 60's? That thing must be pullin' like crazy at the top end. Happen to have any incrementals on one of those runs?
 
danimal95

danimal95

Member
Re: 1/4 mile results video uploaded

just curious why dont you run dr's on all 4 corners?Ive driven in the rain with them on my truck and honestly cant tell the difference from regular radials,I had also driven on them in a down pour in my 1200rwhp mustang with no issues???
 
bezerk

bezerk

New member
Re: 1/4 mile results video uploaded

danimal95 said:
just curious why dont you run dr's on all 4 corners?Ive driven in the rain with them on my truck and honestly cant tell the difference from regular radials,I had also driven on them in a down pour in my 1200rwhp mustang with no issues???
Click to expand...

i went with this setup because tires are $$ over here, and i was kinda afraid my fronts would wear out pretty fast compared to street tires and dragradials in the back.

over there a set of rubber would set you back around $500, as over here it would be $1200.-
 
danimal95

danimal95

Member
Re: 1/4 mile results video uploaded

bezerk said:
i went with this setup because tires are $$ over here, and i was kinda afraid my fronts would wear out pretty fast compared to street tires and dragradials in the back.

over there a set of rubber would set you back around $500, as over here it would be $1200.-
Click to expand...


that makes sense,didnt realize where you were from,next time you buy tires i would recommend the mickey thompsons,mush better tire for the money.Also just so you know i dont have any funky wear patterns on my fronts as long as your alignment is on you should be ok
 
R

red typhoon

Member
Re: 1/4 mile results video uploaded

nice to see somebody is going to the track . with that trap speed of 116 that like a 11.5-11.8 talking in that the ty are 3800 pounds
 
bezerk

bezerk

New member
Re: 1/4 mile results video uploaded

red typhoon said:
nice to see somebody is going to the track . with that trap speed of 116 that like a 11.5-11.8 talking in that the ty are 3800 pounds
Click to expand...

yeah, hoping to make some progress, had some issues with the boost controller and installed a manual i had lying aruond, boost is better but developed a small ( i hope ) ignition problem. some areas are great others misses.

new plugs and wires tomorrow and hope to be set
 
bezerk

bezerk

New member
Re: 1/4 mile results video uploaded

Well..Long story short.

i had my truck in a workshop for getting it road legal and emission tests....
After that i went for testing some settings to find out my Greddy was not doing good..going through different setting and the truck began ranning like shit soon after.

After going through the vacuumlines i found out they blocked the line going through the boostcontroller!!!!!!

So quickly fixed and still running like crap and crappy boostcontrol it made me wonder if i pushed it to hard to test it, i swapped to an manual boost controller with the same results.

Today i threw in new wires and TR5IX plugs and found 2 burned wires (been in there for 3-4yrs). and fixed the problem!! Running like a champ again and ready for the 1/4!!
 
bezerk

bezerk

New member
Re: 1/4 mile results video uploaded

Still no big gun Tag....Shit!!!!

Quickstop, Bundie and me went to the track today to hopefully make a 10s timeslip. but we didn''t made it.

11.3 at 196km/h with a crappy 1.8 60ft!
It was my own fault for not looking at the 60ft time the first 3 runs, because i was bitching with the 2 step setup. i was running 11.7's with 2.0 in the 60ft.
should have looked at that information earlier so we could have made changes.
at 6o clock the waiting line was like 1 hour and we called it a day.

Atleast i know it makes the power to be a steady 10s truck, just have a problem hooking that thing up..Pressure of tires was 17psi in the drag radials and 20psi in the fronts.
 
You must log in or register to reply here.
Top