Wheel spacers

[It's just a six]

Hey guys,

I am thinking of using some Corvette wheels on my Sy.

Was wondering where do you guys get the wheels spacers from?

Have a link for where to get them?

Are there different types, some I should avoid?

Do track tech guys say they are legal to use?

I see these: http://www.ebay.com/itm/2-Pc-Chevy-...its=Model:Syclone&hash=item3a917ab4e4&vxp=mtr
&
http://www.ebay.com/itm/2-25-5X4-75...its=Model:Syclone&hash=item19f299504f&vxp=mtr

http://www.ebay.com/itm/10MM-5X4-75...its=Model:Syclone&hash=item19f2f821bd&vxp=mtr

Thank you.

 

[Brwndrvr05]

Re: Wheel spacers

I always tried to stay away from using spacers but when i had to use them, I always tried to stick with the H&R bolt on spacers. They are really well made.

 

[littleblackpsycho]

Re: Wheel spacers

I have the last ones you have listed on 17" zo6r's and haven't had any problems with them.

 

[Logan]

Re: Wheel spacers

I am also interested in this. I picked up some 89 ZR1 wheels and I know they will need spacers. I have just been putting it off until I get home so I can measure it out and figure out how much I need.

 

[atkonkler]

Re: Wheel spacers

I have the 1.25 spacers in the rear on my wagon wheels....look fine but just alittle bit bigger. ..not really visual to the naked eye unless your really looking hard.

 

[It's just a six]

Re: Wheel spacers

I have the 1.25 spacers in the rear on my wagon wheels....look fine but just alittle bit bigger. ..not really visual to the naked eye unless your really looking hard.

Got any pics?

What size spacers does it need to fit better? 1 3/8" ?

 

[atkonkler]

Re: Wheel spacers

Here ya go ....These are 1.25 spacers...





Hope this helps if you need more let me know....

 

[It's just a six]

Re: Wheel spacers

Thanks for the pics.
What size spacer do you think it needs?

1" , less than 1" ?

 

[atkonkler]

Re: Wheel spacers

I think 1.25 is just right but a tad/slosh to big but not noticeable imo....you could do a 1.0 .....let me know what you end up doing ....I'd like to see the results

 

[It's just a six]

Re: Wheel spacers

Thanks for the pics.
Do you have pics of the sides of the Sy so we could see the actual wheels?

I think the wheels look good.:tup:

 

[fauXGT]

Re: Wheel spacers

I've used them. I put red threadlocker on just for extra.:2cents: