RealFastV6
@jb_and_his_coffee
Re: What did you do to your SyTy today? (part 2)
Got my spring cups machined for my coil overs.
Got my spring cups machined for my coil overs.
What did you do to your SyTy today? (part 2)
- Thread starter MikeRenz
- Start date
RealFastV6
@jb_and_his_coffee
Re: What did you do to your SyTy today? (part 2)
Put the bearings in last night and put them all together. Just sitting there on my couch looking lonely waiting for control arms now.
I'll pull the front end apart this weekend if I don't go up north so I can start doing the spindle mods for the brakes.
:tup:
Got my spring cups machined for my coil overs.
Put the bearings in last night and put them all together. Just sitting there on my couch looking lonely waiting for control arms now.
I'll pull the front end apart this weekend if I don't go up north so I can start doing the spindle mods for the brakes.
:tup:
TrboSy2051
New member
Re: What did you do to your SyTy today? (part 2)
Started it, pulled pass. side cladding and thought about adjusting shifter linkage.
Started it, pulled pass. side cladding and thought about adjusting shifter linkage.
TrboSy2051
New member
Re: What did you do to your SyTy today? (part 2)
O, and dusted underneath it.
O, and dusted underneath it.
Last edited:
jabberwalk
New member
Chest Rockwell
Active member
Re: What did you do to your SyTy today? (part 2)
Traded its companion in on a more enjoyable family car I've always wanted. '97 Volvo 850R.
Traded its companion in on a more enjoyable family car I've always wanted. '97 Volvo 850R.
fauXGT
Brick Pilot
Re: What did you do to your SyTy today? (part 2)
A friend had one exactly like that one. Fast & comfy. :tup:
Traded its companion in on a more enjoyable family car I've always wanted. '97 Volvo 850R.
A friend had one exactly like that one. Fast & comfy. :tup:
Baythan
SY2TY2SY2TY
Re: What did you do to your SyTy today? (part 2)
Not to mention built a like a brick house. Nice volvo steve. You traded your Syclone for it??
I did nothing to the trucks today...but its like spring outside and I'm tempted to bag work and do some detailing. :rotf:
Been driving the Syclone at least once a week and having a good time.
Not to mention built a like a brick house. Nice volvo steve. You traded your Syclone for it??
I did nothing to the trucks today...but its like spring outside and I'm tempted to bag work and do some detailing. :rotf:
Been driving the Syclone at least once a week and having a good time.
Chest Rockwell
Active member
Re: What did you do to your SyTy today? (part 2)
Nah, they're not getting MY Typhoon. The salesman's eyes lit up when I mentioned it, though. Traded the '06 Grand Prix for it. Just didn't need that much space anymore. And you're right, this thing is built SOLID. I wanted to drop the wife and kid off last night and just drive it some more, it's a blast. Luckily, one of my local 'yards has a handful of Volvos to keep me stocked in little parts.
Nah, they're not getting MY Typhoon. The salesman's eyes lit up when I mentioned it, though. Traded the '06 Grand Prix for it. Just didn't need that much space anymore. And you're right, this thing is built SOLID. I wanted to drop the wife and kid off last night and just drive it some more, it's a blast. Luckily, one of my local 'yards has a handful of Volvos to keep me stocked in little parts.
Sean Krupa
Moderator
Re: What did you do to your SyTy today? (part 2)
Turned the Ty around to get ready and start the install on the 60lb injectors and replacing the Valve seals.
Turned the Ty around to get ready and start the install on the 60lb injectors and replacing the Valve seals.
RealFastV6
@jb_and_his_coffee
Re: What did you do to your SyTy today? (part 2)
Update:
Not a ****ing thing has been done. :tup:
Update:
Not a ****ing thing has been done. :tup:
Sean Krupa
Moderator
Re: What did you do to your SyTy today? (part 2)
Finished replacing the Valve seals.
Finished replacing the Valve seals.
SEL777
One of 101
Re: What did you do to your SyTy today? (part 2)
Worked on some more teardown of the front suspension...getting ready for the f-body front brakes, and JSM coilover. But for a first timer it's going slowly. So far rotors, and claipers are off, hubs are off, antilock brake sheilds are off the dust covers, tie rods are off. Having a hardtime with the ball joints, and couldn't stop the axles from moving when trying to loosen the bolts. alos spent some time steel wooling my used cat back.....looks much better....now getting the old crap off....does not look like fun. Pulled out my new axles so they can be trimmed in length to fit the ZR1 front wheels.
Worked on some more teardown of the front suspension...getting ready for the f-body front brakes, and JSM coilover. But for a first timer it's going slowly. So far rotors, and claipers are off, hubs are off, antilock brake sheilds are off the dust covers, tie rods are off. Having a hardtime with the ball joints, and couldn't stop the axles from moving when trying to loosen the bolts. alos spent some time steel wooling my used cat back.....looks much better....now getting the old crap off....does not look like fun. Pulled out my new axles so they can be trimmed in length to fit the ZR1 front wheels.