SevenT6Vet
New member
Re: What did you do to your SY/TY today?
I drove mine into work to stretch it's legs.
I drove mine into work to stretch it's legs.
What did you do to your SY/TY today?
- Thread starter SloGN
- Start date
- Status
LawnGnome92
New member
Re: What did you do to your SY/TY today?
I went and auto crossed for the first time. Definitely going to be going again next week.
http://www.youtube.com/watch?v=jj2Q8TTDiMo
I went and auto crossed for the first time. Definitely going to be going again next week.
http://www.youtube.com/watch?v=jj2Q8TTDiMo
Sean Krupa
Moderator
Re: What did you do to your SY/TY today?
Replaced the Remote oil lines and adaptor gasket. Also coated my Rear LS1 mounting plates with POR-15. More pics and info in my Thread in the Projects section.
Replaced the Remote oil lines and adaptor gasket. Also coated my Rear LS1 mounting plates with POR-15. More pics and info in my Thread in the Projects section.
ty1435_4.3
Shes almost ready
Re: What did you do to your SY/TY today?
Mounted Radiator, But new belt on, Relocating battery & MSD to the back and getting her ready to fire up after a 5yr hibernation.
Mounted Radiator, But new belt on, Relocating battery & MSD to the back and getting her ready to fire up after a 5yr hibernation.
Re: What did you do to your SY/TY today?
ABS Delete with HoodTuned Kit. Messy but easy.
Custom brake fluid suction tool. God bless Shop Vacs. Next time I will make the suction tube longer, I almost sucked up brake fluid with it so high on this one.
Before:
After:
Chris
ABS Delete with HoodTuned Kit. Messy but easy.
Custom brake fluid suction tool. God bless Shop Vacs. Next time I will make the suction tube longer, I almost sucked up brake fluid with it so high on this one.
Before:
After:
Chris
sharkbait
New member
Re: What did you do to your SY/TY today?
lol. we in the north havent seen plants or leafs on a tree in sooooo many months:rant:
lol. we in the north havent seen plants or leafs on a tree in sooooo many months:rant:
aasltmike
Active member
Re: What did you do to your SY/TY today?
Yeah, not sure I want that alternative, either...LOL I'm from South Texas, so pretty much anything below 50 degrees is freezing...LOL
Yeah, not sure I want that alternative, either...LOL I'm from South Texas, so pretty much anything below 50 degrees is freezing...LOL
qbnkiller
Conflaguration Specialist
Re: What did you do to your SY/TY today?
Upgraded my turbo a little for the upcoming year...
Its a Bullseye Power Billet 66 *special*. It is a 66mm compressor, race cover, T3 design. It is a little bit of a jump from the 62mm I ran last year.
I am waiting for my Cometics to come in so I can dyno the engine....
Upgraded my turbo a little for the upcoming year...
Its a Bullseye Power Billet 66 *special*. It is a 66mm compressor, race cover, T3 design. It is a little bit of a jump from the 62mm I ran last year.
I am waiting for my Cometics to come in so I can dyno the engine....
QuinnSY
Donating Member
Re: What did you do to your SY/TY today?
I like that idea!:tup:
ABS Delete with HoodTuned Kit. Messy but easy.
Custom brake fluid suction tool. God bless Shop Vacs. Next time I will make the suction tube longer, I almost sucked up brake fluid with it so high on this one.
Chris
I like that idea!:tup:
Rexxenexx
Active member
Re: What did you do to your SY/TY today?
Rear window used to work on and off. Either it would open when you push the button or it would make a thump noise like it was trying to open. Then I tried adjusting the lock distance forward and it never popped open again, just thump...thump.
Today I first tried spraying what I can see with the tailgate cover removed. Then I removed the spring and cleaned that. Didn't work. I bent the hose tip of the WD40 can around to the axis joint of the puller cable and it popped open perfect over and over. If tomorrow it still works then I'll consider it SOLVED finally.
Rear window used to work on and off. Either it would open when you push the button or it would make a thump noise like it was trying to open. Then I tried adjusting the lock distance forward and it never popped open again, just thump...thump.
Today I first tried spraying what I can see with the tailgate cover removed. Then I removed the spring and cleaned that. Didn't work. I bent the hose tip of the WD40 can around to the axis joint of the puller cable and it popped open perfect over and over. If tomorrow it still works then I'll consider it SOLVED finally.
syclone2673
Member
Re: What did you do to your SY/TY today?
Pulled the distributor cap to replace it and found this mess, Guess its time for a new distributor.This might explain the problem it had starting LOL! It had been sitting all winter in the garage.
Pulled the distributor cap to replace it and found this mess, Guess its time for a new distributor.This might explain the problem it had starting LOL! It had been sitting all winter in the garage.
aasltmike
Active member
Re: What did you do to your SY/TY today?
Replaced the A/C hoses and orifice tube Saturday evening, along with replacing all the O-rings on all the lines and the gaskets on the hoses behind the compressor. Took it to the craft shop on base and had it vacuumed down and leak tested with no leaks. Charged it up and now my A/C blows cold as hell! Ready for summer heat in GA now. :tup:
Replaced the A/C hoses and orifice tube Saturday evening, along with replacing all the O-rings on all the lines and the gaskets on the hoses behind the compressor. Took it to the craft shop on base and had it vacuumed down and leak tested with no leaks. Charged it up and now my A/C blows cold as hell! Ready for summer heat in GA now. :tup:
Sean Krupa
Moderator
Re: What did you do to your SY/TY today?
Took the Typhoon out of storage after doing many mods including the LS1 F+R brake conversion. Went to a local Superdawg with a couple friends and took some pics. I didn't have my IC Scoop on being that I'm polishing it.
Took the Typhoon out of storage after doing many mods including the LS1 F+R brake conversion. Went to a local Superdawg with a couple friends and took some pics. I didn't have my IC Scoop on being that I'm polishing it.
Last edited:
Tony Dipatri
New member
Re: What did you do to your SY/TY today?
Picked up engine from machine shop
#560 almost ready for the road.....Heres a few pics the machine shop took for me.......
http://s754.photobucket.com/albums/xx181/MCASHIZ/?action=view¤t=IMG_1562.png
http://s754.photobucket.com/albums/...181/MCASHIZ/?action=view¤t=IMG_1563.png
http://s754.photobucket.com/albums/...181/MCASHIZ/?action=view¤t=IMG_1561.png
Picked up engine from machine shop
#560 almost ready for the road.....Heres a few pics the machine shop took for me.......http://s754.photobucket.com/albums/xx181/MCASHIZ/?action=view¤t=IMG_1562.png
http://s754.photobucket.com/albums/...181/MCASHIZ/?action=view¤t=IMG_1563.png
http://s754.photobucket.com/albums/...181/MCASHIZ/?action=view¤t=IMG_1561.png
IpHoOnDyou
New member
Re: What did you do to your SY/TY today?
It was great to have my Ty out of storage, and my brother pulled his Sy out this weekend also. Yeah...... we went rippin lol:tup:
It was great to have my Ty out of storage, and my brother pulled his Sy out this weekend also. Yeah...... we went rippin lol:tup:
- Status