What did you do to your SY/TY today?

Status
Not open for further replies.
B

biggeolb

Guest
Re: What did you do to your SY/TY today?

Got your new vac line kit installed SY0237. Still working out the bugs. Looks completely stock with cat back exhaust dont know if it has a stock chip or injectors. Got it started after fuel pump swap and have to check fuel pressure idle seems kind of high, will check before test driving. Thanks
 
escofield

escofield

New member
Re: What did you do to your SY/TY today?

That looks great! Make sure to post up pics once you clear them. Maybe a step by step of your process so I can follow along=]

E

Ruddell said:
Stripped the clear off one of my rims. Theres deffinatly alot more to it then just stripped the clear, its a long process but worth the time. Getting a clean aluminum surface is all in the 3M pads. The 7447 pad cuts the stains well but leaves scratches. I went over the whole rim with the Medium grade after scrubbing the stains off, and then to finish it off I went over it all with the white Fine 3M pad. Doing this all with water of coarse. I will clear coat everything once they are all stripped and cleaned.:tup:

000_0021-2.jpg

000_0022-1.jpg

000_0023-1.jpg
Click to expand...
 
CavScout

CavScout

Member
Re: What did you do to your SY/TY today?

Pulled the transmission and replaced the TC. I may yet drive this thing, well...maybe.
 
sy#2921

sy#2921

BAMF
Re: What did you do to your SY/TY today?

I once again called it a non-rolling junk box. MF'ed it a few times and then didnt think about it again All without seeing it
 
warmpancakes

warmpancakes

New member
Re: What did you do to your SY/TY today?

DSC02721.jpg

this is last weekend actually but im slow
white epoxy primer on a "ready to bolt on" goodmark hood that required serious work to make it fit (both rear corners were down, and the top of the cowl looked like somebody hit it with a bag of nickles

DSC02724.jpg


this is the white epoxy primer on the gate after getting it 99.9% perfect just gotta block sand it then its ready for color :tup:
 
MRKING

MRKING

New Parts for Old Trucks
Re: What did you do to your SY/TY today?

I felt it was time . This is the before picture ....
IMG_4972.jpg
 
ShuggsRR

ShuggsRR

Donating Member
Re: What did you do to your SY/TY today?

Bead blasted SoGT bumperette brackets and bolts, tailgate and rear glass bolts, and misc bolts. Then painted them all. Installed tailgate cables, hardware, and weAtherstripping.

15477956.jpg
 
NJ93TY

NJ93TY

Donating Member
Re: What did you do to your SY/TY today?

Pulled it out of the garage to start it, then it started to snow, pulled it back in the garage, shut it off, went home.
 
CavScout

CavScout

Member
Re: What did you do to your SY/TY today?

Finished putting it back together after the Converter swap. Shifts just fine and lock up no longer stutters. Thanks Hood and Waller.
Removed the window channels and sashes, replaced with new ones.
Test drove just fine. Now chasing a base boost issue...hooray.
 
Big Mike

Big Mike

New member
Re: What did you do to your SY/TY today?

Tested Tuner Pro 5 using my APU1 with blue tooth module. Works good so far, Weird having no Usb wires from laptop to APU1.
 
SYO237

SYO237

SyTy Registry
Re: What did you do to your SY/TY today?

Fixed the foglights on the Ty, screwed around with my hood on the Sy to see if it would fit any better and after 40 minutes, determined it truely is a POS hood. Went out and bought a pinion seal for the Sy since its leaking and plan to change it sometime soon when I get a day.
 
BMFB

BMFB

Not to scale
Re: What did you do to your SY/TY today?

i charged the battery, pulled it into the sunlight, and leather treated the seats
 
P

pontiacws699

New member
Re: What did you do to your SY/TY today?

I can finally post here! Started it up, let her warm up and went to the store and came home and parked it again...
 
R

red typhoon

Member
Re: What did you do to your SY/TY today?

I finally finish my rack and pinion install today . I took the jack stand out and took it out into the parking lot, it feels good . 1st ty with a rack/pinion install . with the cross over pipe.
 
CavScout

CavScout

Member
Re: What did you do to your SY/TY today?

Washed it for the 1st time since she went into the shop...near 6 years ago. Still needs paint, but this will do for now.
That's my grandmother, Digger, doing the honors. It's her shop, I just do the work.
IMG_0105.jpg

IMG_0106.jpg

IMG_0116.jpg
 
Status
Not open for further replies.
Top