Vibration / Noise

This weekend i replaced the Valve Covers to Eldebrock aluminum Now i have a Funny Vibration comming from the Engine kind of like a moan when it comes when its under boose about 2000 RPM and up. my Plugs, Wire, Distributor cap is about 6 months old, not only vibration but loose of Power and sounds like it has a miss kind of like its not firing on all 6. can anybody help this is my daily driver.
 

Trizney

Donating Member
Re: Vibration / Noise

92Typhoon1679 said:
This weekend i replaced the Valve Covers to Eldebrock aluminum Now i have a Funny Vibration comming from the Engine kind of like a moan when it comes when its under boose about 2000 RPM and up. my Plugs, Wire, Distributor cap is about 6 months old, not only vibration but loose of Power and sounds like it has a miss kind of like its not firing on all 6. can anybody help this is my daily driver.

What did you take off when you replaced the valve covers? It has to be one of the pieces you removed and reinstalled.

Got a pic of the valve covers?
 
Reply

Reply

I only removed the oxygen sensor and the oil pressure wires but i double checked them already everything is reinstalled i double checked today still lose of power and vibration.
 

2 SLOW

New member
I had something possibly like the moan you had. I tried everything without success until I replaced the EGR. Check all lines to it to be sure there are no leaks. If they are ok, then see if you can borrow one from someone else to try before spending $60 for a new one. And I found you can't really check the EGR to see if it is ok. I think that is where the moan comes from. Maybe the diaphragm flutters or leaks to make the noise. Then again it could be a spark plug wire. Don't know, just guessing.

HTH
 
Top