Turbo to IC pipe

[kwick6]

Have one of these, previous buyer never replied.

What one looks like installed and lightly polished

Click here - $25 shipped via paypal

 

[aasltmike]

Re: Turbo to IC pipe

Have one of these, previous buyer never replied.

What one looks like installed and lightly polished

Click here - $25 shipped via paypal

Can a BOV flange be welded on this? The pic is small, so I can't see much detail...

 

[kwick6]

Re: Turbo to IC pipe

Can a BOV flange be welded on this? The pic is small, so I can't see much detail...

http://www.detroitturbo.com/albums/album04/DSCN1880.jpg

yes, its SS

 

[SY2455]

Re: Turbo to IC pipe

Scott,

If you will take a PMO via Priority Mail. Then send me a PM with the Name and Address to send it to.

 

[kwick6]

Re: Turbo to IC pipe

Scott,

If you will take a PMO via Priority Mail. Then send me a PM with the Name and Address to send it to.

already sold

 

[aasltmike]

Re: Turbo to IC pipe

Where can I get one of these pipes? I'm in the process of getting what I need to put a BOV on my Ty, and this pipe would make things a lot easier. Would just need to cut a hole in it to have a flange welded on it.

 

[kwick6]

Re: Turbo to IC pipe

any shops that build headers, its 304 SS

 

[aasltmike]

Re: Turbo to IC pipe

any shops that build headers, its 304 SS

Good deal. Looks like I'm hitting up the shop that I had weld my muffler and cat then!

 

[bundie]

Re: Turbo to IC pipe

RPM have them in aluminium:tup:

 

[aasltmike]

Re: Turbo to IC pipe

RPM have them in aluminium:tup:

It would figure that my computer won't let me access the old store....:rant:

 

[bundie]

Re: Turbo to IC pipe

It would figure that my computer won't let me access the old store....:rant:

direct link

http://www.sytyperformance.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=65&category_id=23&manufacturer_id=0&option=com_virtuemart&Itemid=26

 

[aasltmike]

Re: Turbo to IC pipe

direct link

http://www.sytyperformance.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=65&category_id=23&manufacturer_id=0&option=com_virtuemart&Itemid=26

Thanks!

 

[kwick6]

Re: Turbo to IC pipe

Scott,

If you will take a PMO via Priority Mail. Then send me a PM with the Name and Address to send it to.

PM with address sent

Three more no silicone though, $25 shipped ea

 

[kwick6]

Re: Turbo to IC pipe

PM with address sent

Three more no silicone though, $25 shipped ea

2 out of these 3 are pending, including SY2455 so one left as of now

 

[SY2932]

Re: Turbo to IC pipe

Where can I get one of these pipes? I'm in the process of getting what I need to put a BOV on my Ty, and this pipe would make things a lot easier. Would just need to cut a hole in it to have a flange welded on it.

Just a FYI, these pipes are typically 2" OD so you will need a 50MM flange to get your BOV mounted up. Here's a pic of my old HKS that I sold to a member two years ago:

Also, you don't *have* to run a silicone to get the pipe connected on both ends. My pipe was one sold by Bob Galla back in the day. He used 1.5 inch couplers that you can buy from Lowes or Home Depot in the plumbing department. They have a rubber sleeve that has a steel shield around it to keep it from blowing off under boost.

 

[boobiedaddy]

Re: Turbo to IC pipe

I would like one of these if you have any left. Thanks