I am thinking I need to replace the stock turbo seals in my ty. Getting White smoke and a little water coming from the exhaust on startup. If it turns out that I need to replace the seals I am going to replace the bearings since I am working on it. My question is, are these seals and bearings readily available, and where would I be able to get them? I ran a search in the forums and I saw other syty'ers have had this problem but I didnt see anything regarding if it solved the issue. Any insite would be great!!! :lol:
Turbo seals
- Thread starter Wraith
- Start date
I checked the PCV valve and hoses. Blew in the end in which goes into the valve covers and the air flowed right through. Did the same on the other end and just a little seeped threw, hardly any at all. I think it is in good condition?? Last night I had my gf start the ty while I watched the exhaust to verify the color just to make sure I wasnt seeing things. The color was definetly White and the water that came out accumulated to about a 2 to 3 inch diameter circle after she revved it a couple times. Regarding the valve seals, if one of those were bad wouldnt that cause a Blue colored smoke because it is being combusted. If the oil was coming out of the turbo seals and getting into the manifolds frying it would that cause White smoke? HELP!! Last night I also checked the coolant levels, the rad. was full but the intercooler was noticably lower than normal.
TYRODD
My ass. Look at it.
Dude I think your IC may be leaking internally, I have had two that have done this. Smell the exhaust (dont huff though 
) kinda funky? Check your pass. side spark plugs, see if theyre getting fouled. One of mine leaked faster than I could pour it in(on work table not on truck).
) kinda funky? Check your pass. side spark plugs, see if theyre getting fouled. One of mine leaked faster than I could pour it in(on work table not on truck).