Syclone project restarted today with pics
- Thread starter bezerk
- Start date
Re: Syclone project restarted today with pics
is that a floor mat w/ backwards embroidering on it sitting on the floor??
is that a floor mat w/ backwards embroidering on it sitting on the floor??
bezerk
New member
Re: Syclone project restarted today with pics
lol no it's stitting there on it's top.bottem up..you got eye for detail,:tup: man!
lol no it's stitting there on it's top.bottem up..you got eye for detail,:tup: man!
bezerk
New member
Re: Syclone project restarted today with pics
after a hard day of work it looks like a complete truck again. only need to install the propshaft and ziptie some lines and wires underneath and have the last piece of the exhaust welded on.
i need to get onto the lift to check the fronts and lower the back about 2" but some agriculture machines are infront of my lift
.
well here are some pics
after a hard day of work it looks like a complete truck again. only need to install the propshaft and ziptie some lines and wires underneath and have the last piece of the exhaust welded on.
i need to get onto the lift to check the fronts and lower the back about 2" but some agriculture machines are infront of my lift
.well here are some pics
bezerk
New member
Re: Syclone project restarted today with pics
thanks again mike !
í would say yes, you know i didn't use the bulky thing. i just used the thin plate and used washers to fill up the space. the edelbrock waterpumps are different, they have different angles than the stockers. but it work for me pretty well.
thanks again mike !
bezerk
New member
Re: Syclone project restarted today with pics
thanks man, just not happy about the rims. i got them with the truck, but i would love to have some GS wheels
thanks man, just not happy about the rims. i got them with the truck, but i would love to have some GS wheels
R&C_RallySyTy
Little Big Man
Re: Syclone project restarted today with pics
What lower IC set up do you have? I was thinking about going with a big fmic, yours looks real clean with a lower IC setup.
What lower IC set up do you have? I was thinking about going with a big fmic, yours looks real clean with a lower IC setup.
bezerk
New member
Re: Syclone project restarted today with pics
it's the RPM A2A. it has 2 elec fans on it. i would love a fmic
bezerk
New member
Re: Syclone project restarted today with pics
small update lowered the rear about 2" and installed new stops for the front suspension to give it a bit more travel.
also had a problem with blue smoke on idle. burning oil. PTE told me i didn't have to use a restrictor. compression check the engine and everythig to see it could be anything else.
my last thing to do was the turbo so i was like **** it.
so made a restrictor of 1MM and now everything is ok
drove to inspection today as well. but it was smoking like a mofo and also mt alternator acted up. charging no charging. gauge to 0. so i quickly turned around before i had it done. so now i'll try to go there again prolly tomorrow with a none smoking truck. hope the alternator issue is fixed now.
small update lowered the rear about 2" and installed new stops for the front suspension to give it a bit more travel.
also had a problem with blue smoke on idle. burning oil. PTE told me i didn't have to use a restrictor. compression check the engine and everythig to see it could be anything else.
my last thing to do was the turbo so i was like **** it.
so made a restrictor of 1MM and now everything is ok
drove to inspection today as well. but it was smoking like a mofo and also mt alternator acted up. charging no charging. gauge to 0. so i quickly turned around before i had it done. so now i'll try to go there again prolly tomorrow with a none smoking truck. hope the alternator issue is fixed now.
bezerk
New member
Re: Syclone project restarted today with pics
i think this one was also build by him, but it's tighty mighty had to vut my corba elbow and the electric fans mounting stuff to make it work
i think this one was also build by him, but it's tighty mighty had to vut my corba elbow and the electric fans mounting stuff to make it work
bezerk
New member
Re: Syclone project restarted today with pics
it's lower now, normally they are attached to the back of the heads. with clamps. i had them up higher at first becausei needed to run some new wires to the alternator. so i had a bit more room sorting things out.
went to inspections today. everything seemed good. had a code 43 a few times. prollly because of system voltage overload.
it's lower now, normally they are attached to the back of the heads. with clamps. i had them up higher at first becausei needed to run some new wires to the alternator. so i had a bit more room sorting things out.
went to inspections today. everything seemed good. had a code 43 a few times. prollly because of system voltage overload.
![Quickstop [UK]](/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: Syclone project restarted today with pics
Drive it over here
Drive it over here