Syclone parts 4 sale

JJsyclone1128

JJsyclone1128

New member
OK, I don't have the pics yet and tried to make a video but I dont have firewire so I can't post it. Will have pics up asap.
For sale in Philadelphia is the following.

LH+RH stock Sy fenders, faded paint, no rust or dents.(make offer)

Stock Sy hood, faded paint, no rust with a slight bend in the center (inward) from throwing somebody onto the truck during a fight, hardly noticeable(make offer)

Stock Sy bed, faded paint, no dents or rust visible, bed interior has scratches,nicks,dings(make offer)

Stock Sy tailgate, faded paint, 2 slight wrinkles above Syclone sticker, hardly noticeable,no rust(make offer)

LH+RH Stock Sy doors, pass. door was repainted poorly, both locks were ripped out by a fellow Philadelphian who stole the radio,amp,cell phone etc. No inner door panels but windows,motors,switches and handles are there and work. Also no external weather strip.
No visible rust or dents except around the keyholes.(make offer)

LH+RH Stock Sy door cladding, faded but perfect otherwise.(make offer)

LH+RH Stock Sy front box corner cladding, faded, pass. box corner has slight scratch/scuff but otherwise perfect.(make offer)

LH+RH Stock Sy front wheel arch cladding, faded but perfect otherwise(make offer)

LH+RH Stock Sy rocker cladding, faded but perfect otherwise(make offer)

Pass side rear corner cladding,faded, small chips in the part that hides the gap between the roll pan and the cladding, perfect otherwise(make offer)

Stock Sy front bumper, faded with 3 inch crack over driver side marker(make offer)

3 Stock Sy wheels, 2 rear one front, clearcoat is rough on all 3 with a little curb rash on one rear wheel,have caps but no locks, Tires are shot(make offer)

Stock Sy bed cover, vinyl is pretty bad but the rails and everything under it is perfect.(make offer)

All parts are on my 85 s-15 clone truck, nothing has been removed from it yet. I would like to sell the whole truck but will part out if I need to.(make offer)
Obviously I cant see all the mounting points without removing them, but no cladding is loose and I've never had a problem with any.
Pm me or e-mail me with offers and/or questions. forgot to add me e-mail address, its johnmjonas81@yahoo.com
 
Last edited:
JJsyclone1128

JJsyclone1128

New member
Re: Syclone parts 4 sale

oh and the truck is 2.8v6 with a 5 speed, used to be long bed so shortened the frame and drive shaft, the motor hasn't run in years and it blew trannies every other week. I realized we kept it as a 2 piece shaft and only shortened the rear half, so the angle must have been off. Not sure how many miles are on it. The cab was the original, repainted. Add a few parts and a drivetrain it could be a pretty sick truck. I'm moving at the end of the month and need it gone by then, if not I'll have to junk/scrap it.:tdown: This truck was a good inssurance asset. If anything ever happened to my real Sy I had the parts needed to fix it.
 
B

brocksyc

desert syclone
Re: Syclone parts 4 sale

Hello, I am interested in the price on the box rear corner pieces and the wheel arches for the passenger rear of the box. thanks, brock
 
JJsyclone1128

JJsyclone1128

New member
Re: Syclone parts 4 sale

brocksyc said:
Hello, I am interested in the price on the box rear corner pieces and the wheel arches for the passenger rear of the box. thanks, brock
Click to expand...

I only have one rear corner cladding piece (pass side) and no rear arches at all.
If you want the pass rear corner piece send me an offer in PM.
 
V

V

Donating Member
Re: Syclone parts 4 sale

Sending email about the LH and RH rocker cladding.
 
Injected1

Injected1

Member
Re: Syclone parts 4 sale

I want to be next in line for the rockers and the bed. I also need rh & lh rear corners.
 
JJsyclone1128

JJsyclone1128

New member
Re: Syclone parts 4 sale

All parts on hold for now, until I hear back from crazy....he may buy the entire truck the way it sits. I'll keep it updated.
 
crazykaese

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: Syclone parts 4 sale

I'm gonna see if I can get over there Sunday morning and take pics/check it out. I'll help out by posting pics for you at the very least.
 
JJsyclone1128

JJsyclone1128

New member
Re: Syclone parts 4 sale

Well this is what the truck uuuuuuuuuuuuused to look like. It's not this nice anymore though. Too bad I let it become a parts truck that sat around for years.

clone2.jpg
 
JJsyclone1128

JJsyclone1128

New member
Re: Syclone parts 4 sale

MRKING said:
How come you cant post prices ?

My interest in your parts varies with price . This ebay type shit blows . I know you posted it may be sold , but say it doesnt ....

Should i pm you my $10 offers for everything . You did say make offer ..
Click to expand...

You could send me $10 offers all day, you won't like my response though. And as I said I don't have pics available yet because I don't have a digicam ( I need to borrow one).

I say make an offer, hoping to get reasonable offers. I would think people in the Sy/Ty community would have respect for one another when making offers. Most of us know what these parts are worth but I wouldn't mind selling a part for less than its worth to somebody who needs it in SyTy. It's done as a courtesy.

Maybe I should just sell everything on Ebay and see how much i can get for the pieces??
 
MRKING

MRKING

New Parts for Old Trucks
Re: Syclone parts 4 sale

Very understandable .

While the whole selling and buying process typically goes faster with known set prices , more times than none a potential buyer may pass over or get passed over on sales set up in this fashion .

They might have been the first one to see the sale and in thier head willing to pay more than what it may have sold for . But with the economy how it is , the lowball offer is the first to fly .

In a few days if this isnt sold , I will check back with you . Extra parts are always good to have and i may look into purchasing something :)
 
T-Bone

T-Bone

Active member
Re: Syclone parts 4 sale

JJsyclone1128 said:
I say make an offer, hoping to get reasonable offers.
Click to expand...

I have done a fair share of selling on here as reflected by my feedback. It would be light years better to simply list your individual parts (if it comes to that) with your target prices and then add OBO, if you are open to entertaining a lower price. If someone doesn't like your pricing, they will move on instead of bombarding you with multiple $25-40 offers for something you desire $150 for from the get-go. It saves a lot of wasted time on both ends; trust me.......not to mention the low-ballers are the ones to give you migraines after the sale.
 
jasonpickett

jasonpickett

New member
Re: Syclone parts 4 sale

T-Bone said:
I have done a fair share of selling on here as reflected by my feedback. It would be light years better to simply list your individual parts (if it comes to that) with your target prices and then add OBO, if you are open to entertaining a lower price. If someone doesn't like your pricing, they will move on instead of bombarding you with multiple $25-40 offers for something you desire $150 for from the get-go. It saves a lot of wasted time on both ends; trust me.......not to mention the low-ballers are the ones to give you migraines after the sale.
Click to expand...

Trust me, Listen to him he knows. It may take a little more time to write your price but it probally will cut down on 50% of the lowball pm's.
________
TOYS PORN
 
Last edited:
JJsyclone1128

JJsyclone1128

New member
Re: Syclone parts 4 sale

jasonpickett said:
Trust me, Listen to him he knows. It may take a little more time to write your price but it probally will cut down on 50% of the lowball pm's.
Click to expand...

LOL yeah you guys are right. I probably should have listed $ amounts. I thought I was being nice just taking offers but now I see the error of my ways. Besides almost everybody has just PM'd asking what I want for the parts anyway:rotf:.
Well, if crazy doesn't buy it, I'll have to start pulling parts and taking pics. That way I'll be able to give everyone a better idea of whats being sold. I'll keep it updated and thanks for the input.
 
You must log in or register to reply here.
Top