Syclone Gut Swap
- Thread starter Z SKI
- Start date
Z SKI
Donating Member
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Hey Guys, I am just about done with the tear down. Almost to the fun part, putting it back together. With the help of my pops, cousin (visiting from Mn.), and Adam (darkhighway) we got the motor pulled and ready for its new owner. Anyways here are the pics, enjoy. Paul Z.
The dirty hood pulled:
Getting ready, moving crucial parts/wires out of the way:
Let the pulling begin:
Its out :tup: :
Syclone, a whole lot lighter up front:
How i felt at the end of the day :rotf: :
The motor all ready for Lloyd (SY2455) to pick up:
Thats all for now. Soon you guys will get some nice pics of the new guts. See ya, Paul Z.
Special thanks to DaveP for the cherry picker and SyTy knowledge :tup:
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Hey Guys, I am just about done with the tear down. Almost to the fun part, putting it back together. With the help of my pops, cousin (visiting from Mn.), and Adam (darkhighway) we got the motor pulled and ready for its new owner. Anyways here are the pics, enjoy. Paul Z.
The dirty hood pulled:
Getting ready, moving crucial parts/wires out of the way:
Let the pulling begin:
Its out :tup: :
Syclone, a whole lot lighter up front:
How i felt at the end of the day :rotf: :
The motor all ready for Lloyd (SY2455) to pick up:
Thats all for now. Soon you guys will get some nice pics of the new guts. See ya, Paul Z.
Special thanks to DaveP for the cherry picker and SyTy knowledge :tup:
Last edited:
Z SKI
Donating Member
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Yea, Thanks for the shirt Ry :tup:
The new powerplant is:
-Stock block, .040 over, half filled with Hard Blok, billet 4 bolt splayed main caps, nitriated/croyed stock crank, Eagle forged rods, custom 9:1 Diamond boost pistons with ceramic coated domes and dry film coated skirts, Total Seal zero gap rings, Comp 422 cam with Comp everything valve train and ARP/stainless bolts everywhere.
-Unported Brodix -8 heads.
-Modified Brodix carb intake to EFI, forward facing sheet metal intake elbow and a TPIS billet 58mm throttle body.
-75# low imp. injectors, wideband, ostrich, and hopefully Nolan tuned.
-RPM stainless headers, downpipe, fuel rails, motor mounts, valve covers, steering shaft, etc..
-PTE 72GTQ turbo with a custom PTE 3.5" thick behind the grill mounted intercooler and a Alky Control meth kit.
-Tial wastegate and bov.
-Griffin radiator with a ramchargers fan set up.
-Rear mount battery with a Davy Z custom battery tray/mount/wiring.
-Geroge Blake Billet 4L80e build with installation kit and 3000 stall Precision multi disc convertor.
-Alot of powder, bead blasted aluminum, and stainless braided line. Oh and a bunch of suspension and brake stuff :tup:
Thanks bro. The entire suspension/steering stuff will be pulled, painted and rebuilt. Paul Z.
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Ry368 said:Nice shirt brother!!!Jack stands rock.....that's how i've done all my wrenchin......what's the new power plant parts list going to be!?
Yea, Thanks for the shirt Ry :tup:
The new powerplant is:
-Stock block, .040 over, half filled with Hard Blok, billet 4 bolt splayed main caps, nitriated/croyed stock crank, Eagle forged rods, custom 9:1 Diamond boost pistons with ceramic coated domes and dry film coated skirts, Total Seal zero gap rings, Comp 422 cam with Comp everything valve train and ARP/stainless bolts everywhere.
-Unported Brodix -8 heads.
-Modified Brodix carb intake to EFI, forward facing sheet metal intake elbow and a TPIS billet 58mm throttle body.
-75# low imp. injectors, wideband, ostrich, and hopefully Nolan tuned.
-RPM stainless headers, downpipe, fuel rails, motor mounts, valve covers, steering shaft, etc..
-PTE 72GTQ turbo with a custom PTE 3.5" thick behind the grill mounted intercooler and a Alky Control meth kit.
-Tial wastegate and bov.
-Griffin radiator with a ramchargers fan set up.
-Rear mount battery with a Davy Z custom battery tray/mount/wiring.
-Geroge Blake Billet 4L80e build with installation kit and 3000 stall Precision multi disc convertor.
-Alot of powder, bead blasted aluminum, and stainless braided line. Oh and a bunch of suspension and brake stuff :tup:
sy#2921 said:
Thanks bro. The entire suspension/steering stuff will be pulled, painted and rebuilt. Paul Z.
Last edited:
Daron
Active member
Re: Syclone Guts Swap NEW PICS 4 AUG 08
Re: Syclone Guts Swap NEW PICS 4 AUG 08
gawd this is funny. The things dropped in a SyTy engine never to surface again...
Re: Syclone Guts Swap NEW PICS 4 AUG 08
SRT NOT said:...
and i think i found what was causing my random false KR. This little bastard sitting right next to the knock sensor. I guess it has been there for a while due to all of the crud on it :tdown:
gawd this is funny. The things dropped in a SyTy engine never to surface again...
Mtn Z
Donating Member
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Nice! My truck is now mobile again. I have to get an alignment and take care of a few other odds and ends, but it's drivable. I'll be able to come out to your place with it soon. Give me a call later.
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Nice! My truck is now mobile again. I have to get an alignment and take care of a few other odds and ends, but it's drivable. I'll be able to come out to your place with it soon. Give me a call later.
SEL777
One of 101
Re: Syclone Guts Swap
Re: Syclone Guts Swap
I've been drivin my smoked trans daily for over 3 years. The rebuilt one is done and will go in shortly.
Re: Syclone Guts Swap
I've been drivin my smoked trans daily for over 3 years. The rebuilt one is done and will go in shortly.
SY2932
Administrator
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
AWESOME pics! No one can ever say that you are afraid of a wrench, that's for sure :lol:! Lots of folks pulling motors recently, I will be doing mine in the near future too. Good luck on the build. You truck is gonna be a monster went it's done...
I totally dig the t-shirt! Anyway that I could get one in large Ry368 ?
Re: Syclone Guts Swap NEW PICS AUGUST 17th 2008 MOTOR PULLED!!
AWESOME pics
! No one can ever say that you are afraid of a wrench, that's for sure :lol:! Lots of folks pulling motors recently, I will be doing mine in the near future too. Good luck on the build. You truck is gonna be a monster went it's done...I totally dig the t-shirt
! Anyway that I could get one in large Ry368 ?
Z SKI
Donating Member
Re: Syclone Guts Swap NEW PICS AUGUST 25th
Re: Syclone Guts Swap NEW PICS AUGUST 25th
Yea, you need to clean the piss out of it after sitting for a year:rant: Anways we missed you on saturday dude. Hows the truck coming? About ready to come over and do the rear?
Re: Syclone Guts Swap NEW PICS AUGUST 25th
Yea, you need to clean the piss out of it after sitting for a year:rant: Anways we missed you on saturday dude. Hows the truck coming? About ready to come over and do the rear?
Thanks bro, I hope it will be as good as i am expecting. By the way, it was nice meeting you on saturday. I want to see this GN you were talkng about:tup: See ya, Paul Z.
Z SKI
Donating Member
Re: Syclone Guts Swap TEASER PICS SEPTEMBER 6TH
Re: Syclone Guts Swap TEASER PICS SEPTEMBER 6TH
Hey guys, ive been working on the engine with getting everything mocked up. Thought i would drop some teaser pics of some new goodies. Enjoy.
New turbo, downpipe, and wastegate:
Bored out to 52mm stock throttle body, powder coated with all stainless bolts:
Modified IAC passage:
See ya,
Re: Syclone Guts Swap TEASER PICS SEPTEMBER 6TH
Hey guys, ive been working on the engine with getting everything mocked up. Thought i would drop some teaser pics of some new goodies. Enjoy.
New turbo, downpipe, and wastegate:
Bored out to 52mm stock throttle body, powder coated with all stainless bolts:
Modified IAC passage:
See ya,
