ChevelleDude71
Lo Boost
Up for sale after a year of ownership, is my rebuilt syclone. I bought the truck in a rough shape, but it does run strong now and just needs a little more love from someone else. I have to start saving for real estate so the toy has to go.
the project page explains what has been done to the truck, and it comes with a bunch of extra parts that I have lying around. --------> project page -------> http://www.syty.net/forums/showthread.php?t=49415
but for those who are lazy here is a short list of what is done or comes with the truck:
Wideband (LC-1)
Colbalt boost gauge
3 bar MAP/ also have a 2 bar
Walbro fuel pump
MSD distributor
MSD coil
Taylot wires
NGK spark plugs
New gas tank
RPM A2A
Vortech BOV
Flex a light mechanical fan.
B&M trans cooler
Battery relocation
All new engine sensors
deeper tranny pan with drain plug
catless 3" exhaust with borla XR1 muffler (off stock down pipe)
ABS delete
A/C delete
George Blakes front shaft
Upgraded steering shaft
Typhoon side mirrors
Beltech front and rear swaybars
Beltech drop springs (without overload springs)
Beltech 1" drop block
Set back plates
CBR Battle Bars
CBR Corvette brackets (not installed)
C5 Z06 front and rear brakes (also not installed)
C5 wagon wheels powder coated black
Turbo time front coil overs
Custom door panels (By Jerry Arendell)
RPM stage one turbo
Comes with three chips.
The truck has mobil one synthetic and has never seen any less then 100 octaine.
I know this post need photos but I'm at work so this is all I have for now.
I would like to get 8,000 for the truck but I understand that the paint on it is shot so I'm accepting offers, the engine bill was 2200 alone and is very solid. If you wished to buy it and part it out you would get your money back. My dad wont allow me to do so.
I'm located in Livermore CA 94550 if you wish to check shipping rates, and I could work with a buyer if it needs to be driven some where. depending on distance and price.
the project page explains what has been done to the truck, and it comes with a bunch of extra parts that I have lying around. --------> project page -------> http://www.syty.net/forums/showthread.php?t=49415
but for those who are lazy here is a short list of what is done or comes with the truck:
Wideband (LC-1)
Colbalt boost gauge
3 bar MAP/ also have a 2 bar
Walbro fuel pump
MSD distributor
MSD coil
Taylot wires
NGK spark plugs
New gas tank
RPM A2A
Vortech BOV
Flex a light mechanical fan.
B&M trans cooler
Battery relocation
All new engine sensors
deeper tranny pan with drain plug
catless 3" exhaust with borla XR1 muffler (off stock down pipe)
ABS delete
A/C delete
George Blakes front shaft
Upgraded steering shaft
Typhoon side mirrors
Beltech front and rear swaybars
Beltech drop springs (without overload springs)
Beltech 1" drop block
Set back plates
CBR Battle Bars
CBR Corvette brackets (not installed)
C5 Z06 front and rear brakes (also not installed)
C5 wagon wheels powder coated black
Turbo time front coil overs
Custom door panels (By Jerry Arendell)
RPM stage one turbo
Comes with three chips.
The truck has mobil one synthetic and has never seen any less then 100 octaine.
I know this post need photos but I'm at work so this is all I have for now.
I would like to get 8,000 for the truck but I understand that the paint on it is shot so I'm accepting offers, the engine bill was 2200 alone and is very solid. If you wished to buy it and part it out you would get your money back. My dad wont allow me to do so.
I'm located in Livermore CA 94550 if you wish to check shipping rates, and I could work with a buyer if it needs to be driven some where. depending on distance and price.
Last edited:
