IL Sy engine

6

68steiny

Member
I'm not sure what I did, but I'm ready to move on.

Engine is basically stock with Code59 and turbo turned all the way up with a Forge wastegate.

But, I'm pushing coolant through valve covers, so the idea is to pull it and sell it, it appears to be doing it when I boost hard. I'd like to get rid of the other stuff attached also..turbo; harness; Code 59 stuff; etc.

The trans is fine but I'd like to do a mock up with a LS block before I pull it.

Thoughts? Prices?
 
6

68steiny

Member
Re: Sy engine

Getting a few PMs...

I'd like to keep this together as long as I can....not quite ready to start parting, but I will keep it in mind.

I also have a set of vortec heads 114 with the bolt down rockers included, remanufactured. Also have LS1 rockers that can be modded to fit along with some LS lifters I'm told will fit...anyway.



Thanks
 
6

68steiny

Member
Re: Sy engine

Intake is from fivetodrive...$325 shipped, I'll throw in correct felpro gaskets also

Vortec heads - $300

I'll put together a more formal list, have quite a few things, mostly OEM stuff that was pulled off the engine before I bought it. Engine has 44k miles on it.
 
6

68steiny

Member
Re: Sy engine

I'll provide a more updated list with other parts this week...sorry for the delay.

The engine does not have coolant in the oil and fired right up - the issue was with coolant in the breather tank (not sure coolant even gets in there).
 
T-Bone

T-Bone

Active member
Re: Sy engine

Shoot me a price for the whole shebang if I drive up there and pick it up.
 
6

68steiny

Member
Re: Sy engine

Vortec heads and intake are available:

Remanu 113 Vortec heads complete with rockers, valve covers, and correct felpro intake gaskets. Also have been port matched and drilled to the modded intake I bought from fivetodrive. I have the heads packed up and have a pretty accurate estimate of $55/head to ship.

I'll do the package for $625 plus the cost of the heads shipped and ship the manifold for free.

Thanks,

Jon
 
Baythan

Baythan

SY2TY2SY2TY
Re: Sy engine

still interested per our earlier conversation (engine, not heads)

Barring bad weather, I should be in the area on Jan 9
 
6

68steiny

Member
Re: Sy engine

I'm willing to offer a significant discount to anyone willing to help me pull this motor out and take it home - this will include all the parts associated with it: the turbo exhaust manifolds, turbo with forge wastegate, accessories, etc. I've got quite a few goodies on here and am very negotiable.

I have a bunch of tools, but I don't have a cherry picker, we'll need that to pull.

So basically - long block is almost free - other parts are very negotiable

I'm in Chicago on the north side.

Thanks
 
neildemo

neildemo

Administrator
Re: Sy engine

I am intrested in the whole Thing Have a Syclone Roller and A Engine Builder than Can fix. Also intrested in the vortec intake and heads. I am about 5 hours from you
Thanks,
Neil D.
 
Last edited:
You must log in or register to reply here.
Top