stlSY
Truck RamRod
The time has come to sell the rat, so here it is. The story as far as I know is this was a Texas truck up until a few years ago when Daron had it before it went to Jeff Scott in Indiana. I aquired the truck from Jeff and brought it to Missouri. The truck has very little rust. True milage is unknown, the odometer stopped at 84k. I would estimate I have put ~ 3000 on it, so if Jeff or Daron has a clue, we may be able to get a close guess.
The truck is stock with the exeption of a Gilbert prop shaft. Interior is in decent shape, body has some dents and dings and needs paint. Cladding is all there except drivers front arch. Passenger arch is cracked but I do have a used replacement (needs to be painted to match). I also have replacement for drivers rocker cover. Rear corner cladding has some cracks as well. The starter, ball joints, hubs, CV axle and rear axle u-joints were replaced within the last 1000mi. The truck runs ok but does need a tune up. I have two sets of wheels, one stock Sy and one set from a 90 ZR-1 Vette. Stockers have some bends and I have center caps, but they need to be re-drilled for hold down bolts. The steering column also needs repair or replacement as it is loose at the tilt joint.
I don't have any pics right now, but I will try to get some later.
Any questions, please feel free to call 314-520-4340.
Thanks
Rob
The truck is stock with the exeption of a Gilbert prop shaft. Interior is in decent shape, body has some dents and dings and needs paint. Cladding is all there except drivers front arch. Passenger arch is cracked but I do have a used replacement (needs to be painted to match). I also have replacement for drivers rocker cover. Rear corner cladding has some cracks as well. The starter, ball joints, hubs, CV axle and rear axle u-joints were replaced within the last 1000mi. The truck runs ok but does need a tune up. I have two sets of wheels, one stock Sy and one set from a 90 ZR-1 Vette. Stockers have some bends and I have center caps, but they need to be re-drilled for hold down bolts. The steering column also needs repair or replacement as it is loose at the tilt joint.
I don't have any pics right now, but I will try to get some later.
Any questions, please feel free to call 314-520-4340.
Thanks
Rob