stall speed recomendations
- Thread starter quicksuv
- Start date
It's just a six
Super Member
Re: stall speed recomendations
2400- 2600 Stall for a stocker & still not kill your fuel consumption.
2400- 2600 Stall for a stocker & still not kill your fuel consumption.
It's just a six
Super Member
Re: stall speed recomendations
Yes it will,it will be easier to build up boost,but not by much.
A 2800 stall would be the highest I would go w/a stock type Typhoon.
You will get a better take off.
Anything more than 2800,would be a waste. Our engines are low RPM torque monsters.
Yes it will,it will be easier to build up boost,but not by much.
A 2800 stall would be the highest I would go w/a stock type Typhoon.
You will get a better take off.
Anything more than 2800,would be a waste. Our engines are low RPM torque monsters.
dgoodhue
BuSTeD 4.3
Re: stall speed recomendations
The stock torque converter is rated at 1693rpm (at least my original in my Sy was that). Suposedly the Ty converter are a little tighter than Sy.
http://www.syty.net/forums/showthread.php?t=49874&highlight=
If your on a budget, GM's highest stall for 700r4 that I am aware of is 2025rpm. I would be tempted to use that for a stock truck. With the torque of a stock SyTy it probably would stall to 2500-2600 rpm.
The stock torque converter is rated at 1693rpm (at least my original in my Sy was that). Suposedly the Ty converter are a little tighter than Sy.
http://www.syty.net/forums/showthread.php?t=49874&highlight=
If your on a budget, GM's highest stall for 700r4 that I am aware of is 2025rpm. I would be tempted to use that for a stock truck. With the torque of a stock SyTy it probably would stall to 2500-2600 rpm.
![Quickstop [UK]](/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: stall speed recomendations
Tys are 2100 iirc
Tys are 2100 iirc
dgoodhue
BuSTeD 4.3
Re: stall speed recomendations
What they are rated at and what they stall at are 2 different things. The rating is at certain torque. My Sy 1639rom would stall to atleast 2200rpm when I brake torqued it. My old Corvette's 2025 rpm would stall to 2400rpm. I can assure you that the Ty TC is not rated at 2100 rpm unless it aftermarket.
Quickstop [UK] said:
What they are rated at and what they stall at are 2 different things. The rating is at certain torque. My Sy 1639rom would stall to atleast 2200rpm when I brake torqued it. My old Corvette's 2025 rpm would stall to 2400rpm. I can assure you that the Ty TC is not rated at 2100 rpm unless it aftermarket.
Re: stall speed recomendations
cool mine bake stalls around 2000 did the vette make a noticable diffrence in yours i do a lot of 700 and 4l60e but ive only done one for a typhoon ive awys had good luck with vette converters in tpi and lt1 cars but the most ive ever seen one stall is 2200 ive used a conv for a 96 4.3 s10 in a 94 lt1 caprice it stalls about 2400
cool mine bake stalls around 2000 did the vette make a noticable diffrence in yours i do a lot of 700 and 4l60e but ive only done one for a typhoon ive awys had good luck with vette converters in tpi and lt1 cars but the most ive ever seen one stall is 2200 ive used a conv for a 96 4.3 s10 in a 94 lt1 caprice it stalls about 2400