Sonoma GT 0334 - Build Pics
- Thread starter Syborg Twin Turbo
- Start date
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Project JL Die Cast
Parked in front of the Super Market getting ready for Paint
Needed to go to the Fab shop for the Big Wheel conversion
We have paint
Looks like it need a little gas.
On the next version they are going to tuck the tires
Project JL Die Cast
Parked in front of the Super Market getting ready for Paint
Needed to go to the Fab shop for the Big Wheel conversion
We have paint
Looks like it need a little gas.
On the next version they are going to tuck the tires
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Were having a blast. It's getting closer. I should have some extra time today to get it done.
cdezzz said:
Were having a blast. It's getting closer. I should have some extra time today to get it done.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
i know - it happened after paint
MikeRenz said:
i know - it happened after paint
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Guy has been busy working on the getting the turbo's & Wastegates coated.
He offers Ceramic/Metallic Hi Temp Coating that is done in house.
Turbo's stripped and getting ready.
Since this is part Show Truck / Driver.
Guy wanted to make sure the Exhaust housings looked good,
so some extra time was spent cleaning them up.
You can see the before and after pictures of the Wastegate.
Plenty of time was spent on the wastegates cleaning them up.
Step one - The Hi Temp coating has been applied to the exhaust housings.
and the Wastegate.
Now the fun part - polishing up the exhaust housing.
It's getting there - much better then the original rusty version.
almost looks like a butt if you ask me.
It's really good working with a shop that does hi temp coatings in house.
They also coat piston domes, combustion chambers, valves, and do dry film coatings on pistons and bearings,
and even do special coatings on interior surfaces of blocks to aid in oil drainback and heat dissipation.
Currently they are working on a special anti friction coating using Tungsten disulfide.
These guys are serious when it comes to this coating stuff!
Good Morning All,
Guy has been busy working on the getting the turbo's & Wastegates coated.
He offers Ceramic/Metallic Hi Temp Coating that is done in house.
Turbo's stripped and getting ready.
Since this is part Show Truck / Driver.
Guy wanted to make sure the Exhaust housings looked good,
so some extra time was spent cleaning them up.
You can see the before and after pictures of the Wastegate.
Plenty of time was spent on the wastegates cleaning them up.
Step one - The Hi Temp coating has been applied to the exhaust housings.
and the Wastegate.
Now the fun part - polishing up the exhaust housing.
It's getting there - much better then the original rusty version.
almost looks like a butt if you ask me.
It's really good working with a shop that does hi temp coatings in house.
They also coat piston domes, combustion chambers, valves, and do dry film coatings on pistons and bearings,
and even do special coatings on interior surfaces of blocks to aid in oil drainback and heat dissipation.
Currently they are working on a special anti friction coating using Tungsten disulfide.
These guys are serious when it comes to this coating stuff!
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Well, Kenny's back at it.
We took some time off while we were waiting for a new gift from Goodmark Industries.
www.goodmarkindustries.com
So as you can see we received this giant box with a new ...........
........ Steel Cowl Induction Hood.
There will be plenty modifications made to this hood so make sure you keep coming back to see what we have planned.
Kenny & Travis also started making sure the body of the truck was ready for paint.
There attention to detail is way over the top.
Once again I want to Thank Goodmark Industries for seeing our project and wanting to be part of it.
I look forward to working with them on all my future projects.
Good Morning All,
Well, Kenny's back at it.
We took some time off while we were waiting for a new gift from Goodmark Industries.
www.goodmarkindustries.com
So as you can see we received this giant box with a new ...........
........ Steel Cowl Induction Hood.
There will be plenty modifications made to this hood so make sure you keep coming back to see what we have planned.
Kenny & Travis also started making sure the body of the truck was ready for paint.
There attention to detail is way over the top.
Once again I want to Thank Goodmark Industries for seeing our project and wanting to be part of it.
I look forward to working with them on all my future projects.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
yep it's a little tight. My daughters Polly Pockets even dwarf the truck.
super-gt said:Lookin good Marty! I see you finally got the Syborg together, though I must say, it looks alittle smaller than I was originlly thinking. Is the interior cramped?
yep it's a little tight. My daughters Polly Pockets even dwarf the truck.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
I assure Kenny is really going to try to make this truck perfect. People are going to nit-pick the heck out of this truck. So he's going all out.
95xtreme said:looks good, I think they are being a little to picky, if the body work is that straight make sure the run the clear or get something in it at least. No paint job can ever be perfect...
But in this case keep up the good work
I assure Kenny is really going to try to make this truck perfect. People are going to nit-pick the heck out of this truck. So he's going all out.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
It's Tuesday and I'm pumped
Kenny Busted his ars this weekend and the truck is now ready for paint.
The GMC has been removed from the grille - Sorry GM
The new Goodmark hood is on the truck.
The billet Hood Pins are mounted and look sweet.
www.hoodpins.net
Kenny wasn't happy with the gap between the bumper and the tailgate
From the Factory it's well over and Inch.
You won't believe what it took to get the tailgate this close to the bumper.
The Intercooler opening has been finished off.
Also the factory support has been glassed into the front cover.
Getting ready to get loaded and headed over to get the Line-X.
Won't be long till you see the color.
I can't say enough good words about Kenny and his shop and I look forward to working with him on all of my future projects.
It's Tuesday and I'm pumped
Kenny Busted his ars this weekend and the truck is now ready for paint.
The GMC has been removed from the grille - Sorry GM
The new Goodmark hood is on the truck.
The billet Hood Pins are mounted and look sweet.
www.hoodpins.net
Kenny wasn't happy with the gap between the bumper and the tailgate
From the Factory it's well over and Inch.
You won't believe what it took to get the tailgate this close to the bumper.
The Intercooler opening has been finished off.
Also the factory support has been glassed into the front cover.
Getting ready to get loaded and headed over to get the Line-X.
Won't be long till you see the color.
I can't say enough good words about Kenny and his shop and I look forward to working with him on all of my future projects.
warmpancakes
New member
Re: Sonoma GT 0334 - Build Pics
Im gonna need more pics of the Body dropped crew cab behind it
Im gonna need more pics of the Body dropped crew cab behind it
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
here is the link to the shop truck
http://www.lateral-g.net/forums/showthread.php4?t=12974
yep the inside of the bed will be line-x 'd as well as the underside of the cab
95xtreme said:
here is the link to the shop truck
http://www.lateral-g.net/forums/showthread.php4?t=12974
yep the inside of the bed will be line-x 'd as well as the underside of the cab
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
i just found the pics you took of the truck way back on Feb 18 2001
ShuggsRR said:
i just found the pics you took of the truck way back on Feb 18 2001